EasyManua.ls Logo

Kenwood FDM785BA - User Manual

Kenwood FDM785BA
34 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HEAD OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH
122049/2
instructions
TYPE FPM90
TYPE FPM91
English 3 - 18
´¸∂w
91 - 33
FPM90
FPM91
122049 Iss 2 FPM90_FPM91 English_Arabic_FP Iss3 template dual power ENG 09/11/2015 12:30 Page 1

Questions and Answers

  • R
    Rebecca HornAug 16, 2025
    Why is my Kenwood FDM785BA not turning on?
    • B
      Beth MendozaAug 16, 2025
      Your Kenwood Food Processor might not be operating due to several reasons: * It's not plugged in; check the power cord. * The bowl isn't correctly located; ensure the handle is on the right. * The bowl lid isn't locked correctly; the processor won't work if the bowl and lid aren't properly fitted. * The Eco function is active; press the Auto Button or turn the speed control on, then return to ‘O’ to switch off Eco function. * The fuse/circuit breaker in your home may have an issue.
  • T
    Terri MurphyAug 19, 2025
    Why is my Kenwood FDM785BA blender not working?
    • R
      Richard WhiteAug 19, 2025
      The blender won't operate if it's not correctly locked onto the interlock or if it's not assembled properly. Ensure the blade unit is fully tightened into the goblet.
  • C
    Courtney GomezAug 22, 2025
    What to do if my Kenwood FDM785BA stops during processing?
    • J
      Justin HenryAug 22, 2025
      If your Kenwood Food Processor stops or slows down while processing, it could be due to the overload protection being activated, or the processor being overloaded or overheated. Switch it off, unplug it, and let it cool down for about 15 minutes. Also, check the speed chart to ensure you haven't exceeded the maximum processing capacities.
  • R
    Regina SmithAug 26, 2025
    Why is the blender leaking from the blade assembly base on my Kenwood Food Processor?
    • B
      bradleyhawkinsAug 26, 2025
      If your blender or compact chopper/grinder is leaking from the blade assembly base, it is likely that the seal is either missing, incorrectly fitted, or damaged. Check that the seal is correctly fitted and undamaged.
  • C
    Calvin MoranAug 28, 2025
    Why is my Kenwood FDM785BA Food Processor compact chopper/grinder not working?
    • B
      bcharlesAug 28, 2025
      The compact chopper/grinder will not operate if fitted incorrectly to the interlock. Also check that the blade unit is fully tightened onto the compact chopper/grinder jar.
  • J
    Jay ParkerAug 31, 2025
    What to do if the power on light is flashing rapidly on my Kenwood Food Processor?
    • K
      Katherine PerezAug 31, 2025
      If the power on light is flashing rapidly on your Kenwood Food Processor, check that the interlocks are engaged correctly.
  • U
    uparkerSep 3, 2025
    What to do if the power on light is flashing slowly on my Kenwood FDM785BA?
    • O
      olopezSep 3, 2025
      If the power on light is flashing slowly on your Kenwood Food Processor, press either the Auto Button or turn speed control on and then return to ‘O’ to switch off Eco function.
  • D
    Debbie SmithSep 6, 2025
    What does it mean if the Auto and Power On lights are flashing on my Kenwood Food Processor?
    • J
      Jeffrey BowmanSep 6, 2025
      If the Auto and Power On lights are flashing on your Kenwood Food Processor, check that the interlocks are engaged correctly or press the Auto button to switch off the Auto function.
  • B
    Brandon ThompsonSep 9, 2025
    Why does the display screen freeze on [- - - -] or the weight change on my Kenwood Food Processor?
    • K
      Kimberly BennettSep 9, 2025
      If the display screen freezes on [- - - -] or the weight changes on your Kenwood Food Processor, it might be because the quantity weighed is too small. Use teaspoon and tablespoon measures for very small quantities. Also, avoid moving the unit during operation. Zero the display before weighing the next ingredients.
  • S
    smithsheilaSep 12, 2025
    Why is the blender seal missing from the blade unit of my new Kenwood FDM785BA Food Processor?
    • C
      Cheryl BryantSep 12, 2025
      The seal is packed pre-fitted to the blade unit. Unscrew the goblet and check that the seal is fitted to the blade unit.

Kenwood FDM785BA Specifications

General IconGeneral
Power1000 W
Bowl Capacity3 L
Number of Speed Settings2
Pulse FunctionYes
TypeFood Processor
Number of speeds2
Blender FunctionNo
Juicer FunctionNo
MaterialPlastic
Included accessoriesDough tool

Related product manuals