Kenwood FPM810 series

Other manuals for Kenwood FPM810 series

Instructions127 pages

Instruction Manual24 pages

Questions and Answers

R
Robert LiuAug 15, 2025
How to fix a Kenwood Food Processor that will not operate?
- J
  Jessica DavisAug 15, 2025
  If your Kenwood Food Processor isn't working, first check if it's properly plugged in and that the power indicator light is on. Make sure the bowl is correctly located with the handle on the right side, and that the lid interlock is properly engaged in the handle area. The processor won't work if the bowl and lid aren't fitted correctly. Also, try pressing the Auto Button or turning the speed control on and then back to ‘O’ to switch off Eco function. If none of these steps work, check the fuse or circuit breaker in your home.
B
Beverly DeanAug 17, 2025
What to do if the blender won't operate on my Kenwood Food Processor?
- S
  Scott AdamsAug 17, 2025
  If the blender on your Kenwood Food Processor isn't working, it might not be locked on correctly or assembled properly. Ensure the blender is correctly fitted to the interlock and that the blade unit is fully tightened into the goblet.
C
Cristina WigginsAug 21, 2025
What to do if my Kenwood Food Processor stops during processing?
- R
  Richard RiveraAug 21, 2025
  If your Kenwood Food Processor stops or slows down while you're using it, it might be overloaded or overheated, or you may have exceeded the maximum capacity. To fix this, switch it off, unplug it, and let it cool down for about 15 minutes. Then, check the speed chart to make sure you're not exceeding the maximum capacities for processing.
R
Rodney CookAug 25, 2025
Why is the Power On light flashing rapidly on my Kenwood Food Processor?
- B
  Billy LawrenceAug 25, 2025
  A rapidly flashing power light on your Kenwood Food Processor indicates that the bowl, lid, or blender are not correctly fitted to the power unit or not locked in place properly. Ensure that all interlocks are correctly engaged.
J
Julia ZavalaAug 28, 2025
What to do if my Kenwood FPM810 Food Processor blender is leaking?
- D
  Dylan MartinezAug 28, 2025
  If your Kenwood Food Processor blender is leaking from the blade assembly base, the seal may be missing, incorrectly fitted, or damaged. Check that the seal is correctly fitted and undamaged. To obtain a replacement seal see “service & customer care.”
M
Michael BrewerAug 31, 2025
Why is the Auto and Power On light flashing on my Kenwood Food Processor?
- Z
  Zachary MooreSep 1, 2025
  If the Auto and Power On lights are flashing on your Kenwood Food Processor, it means the Auto function is selected, but the interlocks are not engaged. Make sure the interlocks are correctly engaged, or press the Auto button to switch off the Auto function.
A
Anna HansonSep 3, 2025
Why is the Power On light flashing slowly on my Kenwood Food Processor?
- D
  Daniel HoltSep 3, 2025
  If the Power On light is flashing slowly on your Kenwood Food Processor, it means the food processor has been left plugged in for over 30 minutes without being operated and has entered Eco mode. To exit Eco mode, press either the Auto Button or turn the speed control on and then return it to ‘O’.
J
Jessica WalkerSep 7, 2025
Why does the Kenwood FPM810 Food Processor weighing function Display screen freezes?
- J
  John DunnSep 7, 2025
  If the weighing function display screen on your Kenwood Food Processor freezes on [- - - -] or the weight changes, it could be due to weighing too small a quantity or moving the power unit during operation. Use teaspoon and tablespoon measures for very small quantities. Avoid moving the unit while in use, and zero the display before weighing the next ingredient.
B
Bradley YoungSep 12, 2025
Is the blender seal missing from blade unit when removed from packaging of Kenwood FPM810?
- T
  Thomas ProctorSep 12, 2025
  Unscrew goblet and check that seal is fitted to blade unit. To obtain a replacement seal see “service & customer care.”

Summary

Safety Precautions

Scald Risk: Hot Ingredients

Specific warnings and precautions for blending hot ingredients.

Thermoresist Blender Safety

Safety considerations specific to the thermoresist blender.

Preparation and Attachment Usage

Slicing and Grating Discs

Using Your Food Processor

Weighing Function

Using the Weighing Function

Detailed steps for using the built-in weighing feature.

Using Your Thermoresist Blender

Recommended Speed Chart

Using Specific Attachments

Knife Blade

Instructions for using the versatile knife blade.

Dough Tool

Dual Whisk

Folding Tool

Slicing and Grating Discs

Instructions for using various slicing and grating discs.

Using Cutting Discs and Mini Bowl

Using the Cutting Discs

Detailed steps for using various cutting discs.

Mini Bowl and Knife

Care and Cleaning

Power Unit Care

How to clean and maintain the main power unit.

Blender and Whisk Care

Cleaning instructions for blender and whisk attachments.

Folding Tool Care

General Care and Service Information

Cleaning Other Parts

Service and Customer Care

Contact information for support, repairs, and spares.

Troubleshooting Guide

Kenwood FPM810 series Specifications

General

Power	1000W
Pulse Function	Yes
Bowl Capacity	3.5 litres
Working Bowl Capacity (liquid)	1.5 litres
Working Bowl Capacity (dry)	1.5kg
Accessories	Citrus Press
Dimensions	40 x 22 x 23 cm