Kenwood FPM90 - User Manual

Other manuals for Kenwood FPM90

Questions and Answers

G
Gregory BennettAug 16, 2025
Why is my Kenwood Food Processor not turning on?
- C
  Cynthia TateAug 16, 2025
  Your Kenwood Food Processor might not be operating due to several reasons: * It's not plugged in; check the power cord. * The bowl isn't correctly located; ensure the handle is on the right. * The bowl lid isn't locked correctly; the processor won't work if the bowl and lid aren't properly fitted. * The Eco function is active; press the Auto Button or turn the speed control on, then return to ‘O’ to switch off Eco function. * The fuse/circuit breaker in your home may have an issue.
T
Thomas BakerAug 19, 2025
Why is my Kenwood FPM90 Food Processor blender not working?
- G
  grahammauriceAug 19, 2025
  The blender won't operate if it's not correctly locked onto the interlock or if it's not assembled properly. Ensure the blade unit is fully tightened into the goblet.
R
Riley CampbellAug 22, 2025
What to do if my Kenwood Food Processor stops during processing?
- T
  teresa43Aug 22, 2025
  If your Kenwood Food Processor stops or slows down while processing, it could be due to the overload protection being activated, or the processor being overloaded or overheated. Switch it off, unplug it, and let it cool down for about 15 minutes. Also, check the speed chart to ensure you haven't exceeded the maximum processing capacities.
L
Lisa PonceAug 26, 2025
Why is the blender leaking from the blade assembly base on my Kenwood FPM90 Food Processor?
- E
  Erik MejiaAug 26, 2025
  If your blender or compact chopper/grinder is leaking from the blade assembly base, it is likely that the seal is either missing, incorrectly fitted, or damaged. Check that the seal is correctly fitted and undamaged.
R
Rachel BennettAug 28, 2025
Why is my Kenwood Food Processor compact chopper/grinder not working?
- S
  stephanie87Aug 28, 2025
  The compact chopper/grinder will not operate if fitted incorrectly to the interlock. Also check that the blade unit is fully tightened onto the compact chopper/grinder jar.
R
richardgreenAug 31, 2025
What to do if the power on light is flashing rapidly on my Kenwood FPM90 Food Processor?
- A
  Amy TuckerAug 31, 2025
  If the power on light is flashing rapidly on your Kenwood Food Processor, check that the interlocks are engaged correctly.
W
William JacksonSep 3, 2025
What to do if the power on light is flashing slowly on my Kenwood FPM90 Food Processor?
- M
  Michelle FreemanSep 3, 2025
  If the power on light is flashing slowly on your Kenwood Food Processor, press either the Auto Button or turn speed control on and then return to ‘O’ to switch off Eco function.
A
Angela WebbSep 6, 2025
What does it mean if the Auto and Power On lights are flashing on my Kenwood FPM90?
- K
  Kimberly ReedSep 6, 2025
  If the Auto and Power On lights are flashing on your Kenwood Food Processor, check that the interlocks are engaged correctly or press the Auto button to switch off the Auto function.
M
Margaret WeaverSep 9, 2025
Why does the display screen freeze on [- - - -] or the weight change on my Kenwood FPM90 Food Processor?
- L
  Linda RodriguezSep 9, 2025
  If the display screen freezes on [- - - -] or the weight changes on your Kenwood Food Processor, it might be because the quantity weighed is too small. Use teaspoon and tablespoon measures for very small quantities. Also, avoid moving the unit during operation. Zero the display before weighing the next ingredients.
M
Matthew TorresSep 12, 2025
Why is the blender seal missing from the blade unit of my new Kenwood FPM90?
- H
  huffmanashleySep 12, 2025
  The seal is packed pre-fitted to the blade unit. Unscrew the goblet and check that the seal is fitted to the blade unit.