What to do if my Kenwood Blender processor stops during processing?
If your Kenwood Blender processor stops during processing, it might be overloaded or exceeding its maximum capacity. Refer to the recommended speed chart to verify that you are not exceeding the stated maximum capacities. Also, ensure that the lid is properly locked.
How to fix a Kenwood Blender processor that won't operate?
If your Kenwood Blender processor will not operate, first, ensure that the processor is correctly plugged into a power source. Then, check that the bowl is correctly located with the handle situated towards the right-hand side, and verify that the lid interlock is correctly positioned into the handle area. The processor will not function if the bowl and lid are not correctly fitted. If these steps do not resolve the issue, inspect the fuse or circuit breaker in your home.
Why is my Kenwood Blender liquidiser or mini chopper/mill leaking?
If your Kenwood Blender liquidiser or mini chopper/mill is leaking from the blade assembly base, check that the seal is correctly fitted and undamaged. If the seal is damaged, you can find information on obtaining a replacement in the “service & customer care” section.
Why my Kenwood Blender processor will not operate?
If your Kenwood Blender processor will not operate, first, ensure it's plugged in and receiving power. Check that the bowl is correctly located with the handle on the right side and that the lid is properly locked into the handle area. The processor won't function if the bowl and lid aren't correctly fitted. If these steps don't resolve the issue, check the fuse or circuit breaker in your home.
Why is my Kenwood Blender liquidiser/mill leaking from blade assembly base?
If your Kenwood Blender liquidiser/mill is leaking from the blade assembly base, inspect the seal. Make sure it is correctly fitted and undamaged. For a replacement seal, refer to the service and customer care information.
What to do if Kenwood Blender liquidiser or mini chopper/mill will not operate?
If the Kenwood Blender liquidiser or mini chopper/mill will not operate, ensure that it is correctly locked onto the interlock. Also, verify that the blade unit is fully tightened into the goblet or jar.
What to do if my Kenwood Blender liquidiser/mill will not operate?
If your Kenwood Blender liquidiser/mill won't operate, it might not be correctly locked or assembled. Ensure it is correctly fitted to the interlock and that the blade unit is fully tightened into the goblet or jar.
Covers safe handling of blades, lifting the unit, and feed tube usage.
Details risks like scalds, correct unit fitting, and interlock mechanism.
Identifies the main components and parts of the food processor.
Instructions for washing parts and initial checks before first use.
Step-by-step guide for the basic operation of the food processor.
Instructions for the correct assembly and operation of the liquidiser.
Instructions for the correct assembly and operation of the mini chopper/mill.
Guide to selecting appropriate speeds for various food processing tasks.
Guidelines for using the versatile knife blade for chopping and pureeing.
Instructions for using the dough tool for yeasted dough mixes.
Guidance on using the emulsifying tool for light mixtures like mayonnaise.
Instructions for using the reversible slicing and grating disc.
How to assemble and use the citrus juicer attachment.
Procedures for cleaning the power unit, liquidiser, and other parts.
Information on obtaining assistance and contacting customer support.
Guidelines for the correct and environmentally friendly disposal of the product.
Lists common issues with the processor and their recommended solutions.
Ingredients and steps to prepare carrot and coriander soup.
Ingredients and steps to prepare shortcrust pastry.
Ingredients and steps to prepare mayonnaise.
Ingredients and steps to bake white bread.
General| Brand | Kenwood |
|---|---|
| Model | FPP230 series |
| Category | Food Processor |
| Language | English |
To Next Page
