Kenwood K20MSS15 User Manual

22
1. Press the Microwave (1) button once and
the LED display will show “P100”. Press the
Microwave (1) button repeatedly until the
LED display show “P80”.
delay start cooking (programme set in advance)
For delay start cooking, follow the steps below.
For instance: The current time is 12 o’clock (noon) and you want to cook with 80% microwave
power for 5 minutes at 1:30 in the afternoon.
2. Press the Start/+30Sec/Confirm (4) button
to confirm the microwave power level.
Turn the Time/Weight/Auto Menu (5) dial
to adjust the cooking time until the LED
display shows “5:00”.
3. Press the Clock/Pre-Set (2) button to
preset the starting time for the cooking. The
hour digits will flash. Turn the Time/Weight/
Auto Menu (5) dial to adjust the hour.
4. Press the Clock/Pre-Set (2) button again.
The minute digits will flash. Turn the Time/
Weight/Auto Menu (5) dial to adjust the
minutes.
5. Press the Start/+30Sec/Confirm (4) button
to complete the setting. The microwave
will beep when the count down reaches
the starting time and cooking will start
automatically.
6. Press the Stop/Clear (3) button to cancel
the setting.
Ensure the clock is set prior to setting the programme.
A-1
auto reheat
A-5
pasta
A-2
vegetables
A-6
potatoes
A-3
fish
A-7
pizza
A-4
meat
A-8
soup
Alternatively, after you press the
Microwave (1) button once, you can turn
the Time/Weight/Auto Menu (5) dial to
change the power level.
Do not press the Start/+30Sec/Confirm
(4) button at this stage.
To find out the preset time, press the
Clock/Pre-Set (2) button once while the
microwave is still in the preset state. It will
last for 2-3 seconds and then return to its
original display.
1
2
3
4
5
K20MSS15_IB_RC_151119_grace.indd 22 19/11/15 9:35 am

Kenwood K20MSS15 Specifications

General

Brand	Kenwood
Model	K20MSS15
Category	Microwave Oven
Language	English