Do you have a question about the Kenwood KA-95 and is the answer not in the manual?
rated power output | 125 watts per channel |
---|---|
total harmonic distortion at rated output | 0.05% |
intermodulation distortion | 0.02% at rated power |
phono MM sensitivity/impedance | 2.5 mV/47 k ohms |
---|---|
TUNER, AUX., TAPE PLAY sensitivity/impedance | 150 mV/33 k ohms |
maximum input level for Phono MM | 140 mV (RMS) |
signal-to-noise ratio for Phono MM 2.5 mV | 73 dB |
---|---|
signal-to-noise ratio for Phono MM 6.0 mV | 79 dB |
signal-to-noise ratio for TUNER, AUX., TAPE PLAY | 100 dB |
dimensions (W x H x D) | 420 mm x 103 mm x 280 mm |
---|---|
weight | 5 kg |
weight (pounds) | 18.7 lb |
Warning against opening the unit to avoid electric shock hazard.
Advises against removing covers and refers servicing to qualified personnel.
Units for USA/Canada (120V) and Europe/UK (220/240V) lack external selector switches.
Units for other countries have a rear panel selector; adjust to match local line voltage.
Warning to prevent fire or electric shock by keeping appliance away from rain or moisture.
Do not open unit; touching internal parts poses a risk of severe electric shock.
Keep foreign objects and wet hands away from power sources to prevent shock.
In case of abnormal smell or smoke, immediately power off, unplug, and seek service.
Details on POWER switch, SPEAKERS switch, PHONES jack, TONE CONTROLS, BALANCE, INPUT SELECTOR, METER RANGE, VOLUME, and POWER INDICATOR.
Table of symptoms, causes, and remedies for common operational difficulties.