Do you have a question about the Kenwood KAC-PS500F and is the answer not in the manual?
max power output (4 Ω) - 4 channel mode | 150 W × 4 |
---|---|
max power output (4 Ω) - 3 channel mode | 150 W × 2 + 600 W × 1 |
max power output (4 Ω) - 2 channel mode | 600 W × 2 |
rated power output (4 Ω, +B = 12.0 V) - 4 channel mode | 50 W × 4 |
rated power output (4 Ω, +B = 12.0 V) - 3 channel mode | 50 W × 2 + 200 W × 1 |
rated power output (4 Ω, +B = 12.0 V) - 2 channel mode | 200 W × 2 |
rated power output (2 Ω, +B = 12.0 V) - 4 channel mode | 100 W × 4 |
rated power output (4 Ω, +B = 14.4 V) - 4 channel mode | 75 W × 4 |
rated power output (4 Ω, +B = 14.4 V) - 3 channel mode | 75 W × 2 + 300 W × 1 |
rated power output (4 Ω, +B = 14.4 V) - 2 channel mode | 300 W × 2 |
rated power output (2 Ω, +B = 14.4 V) - 4 channel mode | 150 W × 4 |
frequency response (+0, –1 dB) | 5 Hz ~ 50 kHz |
---|---|
total harmonic distortion (rated power) | 0.010 % (1 kHz) |
signal to noise ratio | 110 dB |
sensitivity (rated output) (max) | 0.2 V |
sensitivity (rated output) (min) | 5.0 V |
input impedance | 10 kΩ |
damping factor | More than 1000 (at ∑ connect) |
low pass filter frequency (24 dB/oct.) (variable) | 50 ~ 200 Hz |
---|---|
high pass filter frequency (12 dB/oct.) (variable) | 50 ~ 200 Hz |
infrasonic filter frequency (24 dB/oct.) | 15 / 25 Hz |
operating voltage | 12.0 V (11 ~ 16 V allowable) |
---|---|
current consumption (4 Ω, +B = 12.0 V, 10% THD) | 42 A |
dimensions (W × H × D) | 272 × 58 × 450 mm |
weight | 7.0 kg |