Need help?Do you have a question about the Kenwood KAC-746 and is the answer not in the manual?
Audio Section| Max Power Output (4 Ω) - 4 Channel Mode | 70 W × 4 |
|---|---|
| Max Power Output (4 Ω) - 3 Channel Mode | 70 W × 2 + 200 W × 1 |
| Max Power Output (4 Ω) - 2 Channel Mode | 200 W × 2 |
| Rated Power Output (4 Ω) - 4 Channel Mode | 35 W × 4 (DIN45324, +B=14.4 V) |
| Rated Power Output (4 Ω) - 3 Channel Mode | 35 W × 2 (1 kHz, 0.08 % THD) + 100 W × 1 (1 kHz, 0.8 % THD) |
| Rated Power Output (4 Ω) - 2 Channel Mode | 100 W × 2 (1 kHz, 0.8 % THD) |
| Rated Power Output (2 Ω) - 4 Channel Mode | 50 W × 4 (1 kHz, 0.8 % THD) |
| Frequency Response (+0, –1 dB) | 5 Hz ~ 50 kHz |
| Signal to Noise Ratio | 100 dB |
| Sensitivity (MAX) (rated output) | 0.15 V |
| Sensitivity (MIN) (rated output) | 4.0 V |
| Input Impedance | 10 kΩ |
| Low Pass Filter (12 dB/oct.) (Variable) | 50 ~ 200 Hz |
| High Pass Filter (12 dB/oct.) (Variable) | 50 ~ 200 Hz |
General| Operating Voltage | 14.4 V (11 ~ 16 V allowable) |
|---|---|
| Current Consumption (1 kHz, 10% THD) | 28 A |
| Dimensions (W × H × D) | 290 × 52 × 230 mm |
| Weight | 3.1 kg |
Step-by-step instructions for safely installing the amplifier in a vehicle.
Details on main controls like FREQUENCY, FILTER, and OPERATION switches for audio adjustments.
Instructions and diagrams for connecting the amplifier using RCA audio cables.
Method for connecting speakers directly to the unit via speaker wire inputs.
Guidance and precautions for bridging speaker outputs to achieve higher power.
To Next Page
