To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KAC-7203 and is the answer not in the manual?
General| Amplifier Class | AB |
|---|---|
| Number of Channels | 2 |
| Frequency Response | 10 Hz - 50 kHz |
| THD at Rated Power | 0.08% |
| Input Sensitivity | 0.2 - 5 V |
| Bass Boost | 0 - 18 dB |
| Speaker Level Inputs | Yes |
| Preamp Outputs | Yes |
| Fuse Rating | 25A x 1 |
| Signal-to-Noise Ratio | 100dB |
| Variable Low-Pass Crossover | 50-200 Hz |
| Variable High-Pass Crossover | 50-200 Hz |
Key safety warnings for preventing fire, injury, and unit damage, including installation, electrical, and operational precautions.
Information on FCC compliance, radio frequency energy, and proper disposal of electronic equipment according to EU regulations.
Operational guidelines covering cleaning, battery management, protection function, wiring best practices, and speaker impedance selection.
Lists the accessories included with the unit, such as screws, terminal covers, and cables, with external views and quantities.
Step-by-step procedure for installing the unit, including disconnecting the battery, setting the unit, connecting wires, and final checks.
Cautionary advice regarding installation locations, heat dissipation, airflow obstruction, and vehicle safety checks after installation.
Details on connecting the unit using RCA cables or speaker level inputs, including specific connection diagrams.
Diagrams illustrating the connection of power wires, ground wires, power control wires, and speaker wires for both stereo and bridged modes.
Details on power-related terminals, fuse, and control connections for unit operation and system integration.
Description of speaker output, speaker level input, and line input/output terminals for audio signal management.
Overview of unit indicators and adjustment controls, including power status, filters, operation modes, sensitivity, and sound enhancement.
Illustrations of common system setups, including 2-channel, high-power, and subwoofer configurations.
Diagram and explanation for a Tri-mode system, detailing frequency band division using external components and calculation methods.
Troubleshooting common issues like no sound, distorted sound, or incorrect output levels, with potential causes and solutions.
Detailed audio specifications including power output, impedance, frequency response, and input sensitivity.
General technical details covering operating voltage, current consumption, physical dimensions, and unit weight.
