Need help?Do you have a question about the Kenwood KAC-7200 and is the answer not in the manual?
Clean the unit using a dry, soft cloth. Avoid using solvents like thinner or alcohol to prevent surface damage.
General| Frequency Response | 10 Hz - 50 kHz |
|---|---|
| THD at RMS Power | 0.08% |
| Input Voltage | 14.4V |
| RMS Power at 2 Ohms | 120W x 2 |
| Bridged RMS Power at 4 Ohms | 240W x 1 |
| Signal to Noise Ratio | 100 dB |
| Input Sensitivity | 200mV - 4V |
| Crossover | High-pass/Low-pass |
To Next Page
