Do you have a question about the Kenwood KAC-8402 and is the answer not in the manual?
Number of Channels | 4 |
---|---|
THD (Total Harmonic Distortion) at Rated Power | 0.08% |
RMS Power @ 2 Ohms | 75 Watts x 4 |
Bridged RMS Power @ 4 Ohms | 150 Watts x 2 |
Signal-to-Noise Ratio | 100dB |
Input Voltage | 14.4V |
Input Sensitivity | 0.2V - 5V |
Crossover | High-pass/Low-pass |
Precautions to prevent personal injury or fire hazards during operation and handling.
Precautions to prevent damage to the unit from improper connections or installation.
Detailed instructions for proper power and ground wire connections.
Guidance on selecting speakers based on rated power and impedance for optimal performance.
Critical warnings to prevent fire and damage during wiring connections.
Diagram illustrating power, ground, and speaker wire connections.
Explanation of input selector, filter switches, and frequency controls.
Table listing common issues, possible causes, and recommended solutions.