Do you have a question about the Kenwood KAC-8401 and is the answer not in the manual?
max power output | 320 W × 2 |
---|---|
rated power output (4 Ω) | 60 W × 4 |
rated power output (2 Ω) | 90 W × 4 |
bridged power output (4 Ω) | 180 W × 2 |
frequency response | 5 Hz – 50 kHz |
sensitivity (max) | 0.2 V |
sensitivity (min) | 5.0 V |
signal to noise ratio | 100 dB |
input impedance | 10 kΩ |
low pass filter frequency | 50 – 200 Hz (variable) |
high pass filter frequency | 50 – 200 Hz (variable) |
bass boost circuit (90 Hz) | OFF / +6 dB |
operating voltage | 14.4 V (11 – 16 V allowable) |
---|---|
current consumption (4 Ω, 10 % THD) | 39 A |
dimensions (W × H × D) | 285 × 57 × 268 mm |
dimensions (W × H × D in inches) | 11-1/4 × 2-1/4 × 10-9/16 inch |
weight | 2.96 kg (6.5 lbs) |
Adjusts the input level to match the pre-output level of the center unit.
Details stereo and bridged connection requirements for speaker outputs.
Instructions for connecting power, ground, and battery wires to prevent issues.
Guidance on choosing speakers based on impedance and power ratings.
Illustrates RCA and speaker level input connections from the center unit.
Troubleshooting steps for no sound or sound from only one side.
Troubleshooting for incorrect output levels.
Troubleshooting steps for distorted sound quality.
Details on power output, frequency response, and sensitivity.