To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KAC-8101D and is the answer not in the manual?
Audio| max power output | 1000 W × 1 |
|---|---|
| rated power output (4 Ω) (20 Hz – 200 Hz, 0.5 % THD) | 200 W × 1 |
| rated power output (2 Ω) (100 Hz, 0.5 % THD) | 400 W × 1 |
| rated power output (1 Ω) (100 Hz, 1.0 % THD) | 500 W × 1 |
| frequency response (+0, –3 dB) | 5 Hz – 200 Hz |
| sensitivity (rated output) (MAX.) | 0.2 V |
| sensitivity (rated output) (MIN.) | 5.0 V |
| signal to noise ratio | 100 dB |
| input impedance | 10 kΩ |
| low pass filter frequency (18 dB/oct.) | 50 – 200 Hz (variable) |
| infrasonic filter frequency (18 dB/oct.) | OFF / 15 / 25 Hz |
| bass boost circuit (90 Hz) | OFF / +12 dB |
General| operating voltage | 14.4 V (11 – 16 V allowable) |
|---|---|
| current consumption (4 Ω, 10 % THD) | 31 A |
| dimensions (W × H × D) | 285 × 57 × 268 mm |
| weight | 2.96 kg |
Warning regarding radio frequency energy, modifications, and user authority.
Instructions for cleaning the front panel using a dry silicon or soft cloth.
Advice on operating the unit with the engine off to prevent battery depletion.
Explanation of the unit's protection feature and its indicator.
Details on how to mount the remote controller and set its knob.
Important warnings and cautions for selecting installation locations and methods.
Explanation of the EXPANDER, LPF, INFRASONIC, and BASS BOOST switches.
Guidance on setting the input sensitivity based on system specifications.
How to control the Bass Boost feature using the remote controller.
Describes the function of the power indicator light and potential issues.
Lists situations that activate the unit's protection function.
Identification and description of all terminals on the amplifier unit.
Detailed steps for installing the amplifier unit within a vehicle.
Best practices for connecting power, ground, and speaker wires safely.
Guidance on choosing speakers with appropriate impedance and power ratings.
Diagrams and instructions for connecting via RCA or speaker level inputs.
Instructions for connecting the remote control cable.
Diagram illustrating how to connect speaker wires to the unit.
Diagrams for connecting the battery wire, ground wire, and protective fuse.
Troubleshooting steps for no sound or sound from only one side.
Solutions for output levels that are too small or too large.
Troubleshooting distorted sound or other quality problems.
Steps to resolve issues where the remote controller does not function.
Detailed technical specifications for the amplifier's audio performance.
General operating parameters, dimensions, and weight of the unit.
