Do you have a question about the Kenwood KAC-8104D and is the answer not in the manual?
Amplifier Class | D |
---|---|
Number of Channels | 1 |
Signal to Noise Ratio | 100 dB |
Input Sensitivity | 0.2 V - 5 V |
Fuse Rating | 30 A |
RMS Power at 4 Ohms | 300 Watts |
Low Pass Crossover | 50Hz - 200Hz |
Subsonic Filter | 15 Hz |
Bass Boost | 0 - 18 dB |
Guidelines on using correct wires, avoiding short circuits, and handling hot surfaces.
Precautions for power supply, installation location, and fuse replacement.
Details the installation process and critical location warnings.
Guidance on connecting RCA cables or speaker level inputs to the unit.
Details how to connect speakers and the LINE OUT terminal.
Instructions for connecting the battery wire, power control wire, and ground wire.
Provides solutions for common problems like no sound or distorted audio.