To Next PageTo Next Page
Need help?Do you have a question about the Kenwood 8452 - KAC Amplifier and is the answer not in the manual?
General| Frequency Response | 10 Hz - 50 kHz |
|---|---|
| Signal-to-Noise Ratio | 100 dB |
| THD (Total Harmonic Distortion) at RMS Output | 0.08% |
| Peak Power Output | 300 Watts |
| Input Sensitivity | 200mV - 5V |
| Crossover | LPF: 50Hz-200Hz, HPF: 50Hz-200Hz |
Record serial and model numbers for warranty and service.
Crucial warnings to prevent fire, injury, and unit damage.
Details on radio frequency energy and user modification restrictions.
Explanation of protection functions, battery care, and wiring guidelines.
Recommendations for selecting speakers based on impedance and power.
List of parts provided for mounting and connecting the amplifier.
Detailed instructions for physically installing the amplifier in a vehicle.
Advice on choosing safe and effective installation spots to prevent damage.
Essential safety warnings for electrical connections and wiring.
Guidance on connecting audio sources via RCA or speaker level inputs.
Diagrams and instructions for connecting power, ground, and speaker wires.
Locating the control panel and identifying key components.
Description of terminals for power, ground, audio input/output, and speakers.
Explanation of switches and controls for filtering, operation mode, and sensitivity.
Examples for 4-channel and high-power 2-channel speaker configurations.
Guidance on connecting subwoofers with 2-channel systems.
How to set up and understand tri-mode operation with frequency division.
Guide to identifying and resolving common operational and wiring problems.
Detailed audio performance specifications for the amplifier.
Physical, operational, and CEA-2006 compliant specifications.
