Need help?Do you have a question about the Kenwood KAC-718 and is the answer not in the manual?
Audio Specifications| max power output (4 Ω) | 240 W × 1 (at 100 Hz) |
|---|---|
| rated power output (4 Ω) | 120 W × 1 (DIN45324, +B=14.4V, at 100 Hz) |
| rated power output (2 Ω) | 160 W × 1 (0.8 % THD at 100 Hz) |
| signal to noise ratio | 100 dB |
| sensitivity (max) | 0.15 V (rated output) |
| sensitivity (min) | 4.0 V (rated output) |
| input impedance | 10 kΩ |
| damping factor | More than 100 |
| low pass filter frequency (12 dB / oct.) | 30 ~ 200 Hz (Variable) |
General Specifications| operating voltage | 14.4 V (11 ~ 16 V allowable) |
|---|---|
| current consumption (1 kHz, 10% THD, 4 Ω) | 15 A |
| dimensions (W × H × D) | 290 × 56 × 170 mm |
| weight | 3.0 kg |
Safety warnings to prevent injury or fire during operation.
Precautions to prevent damage to the machine.
Step-by-step instructions for installing the unit.
Cautions regarding installation procedures and potential hazards.
Cautions about specific installation locations and risks.
Terminals for connecting power, speakers, ground, and remote.
Situations that activate the unit's protection circuit.
Diagram illustrating speaker cable connection.
To Next Page
