How to fix no sound on Kenwood Car Receiver?
If you cannot hear any sound from your Kenwood Car Receiver, first, adjust the volume to the optimum level. If the problem persists, check the cords and connections to ensure they are properly connected.
Why is the radio reception poor on my Kenwood Car Receiver?
If you are experiencing poor radio reception or static noise with your Kenwood Car Receiver, make sure the antenna is firmly connected. Also, try pulling the antenna out all the way to improve reception.
What to do if my Kenwood Car Receiver does not work?
If your Kenwood Car Receiver is not working at all, try resetting the unit.
What to do if “PROTECT” appears on Kenwood Car Receiver?
If “PROTECT” appears on your Kenwood Car Receiver and no operations can be performed, ensure the terminals of the speaker leads are properly covered with insulating tape. Then, reset the unit. If the issue continues, consider consulting a service center.
Why my Kenwood Car Receiver has no sound and doesn't turn on?
If you're experiencing issues such as no sound, the unit not turning on, or incorrect information on the display of your Kenwood Car Receiver, the connectors might be dirty. Clean the connectors to resolve this issue.
What causes interrupted disc sound on Kenwood Car Receiver?
If the disc sound is sometimes interrupted on your Kenwood Car Receiver, stop playback while driving on rough roads. You can also try changing the disc or checking the cords and connections.
What does ERROR 99 mean on a Kenwood Car Receiver?
If “ERROR 99” appears on your Kenwood Car Receiver, it indicates the unit is malfunctioning. Try pressing the reset button on the unit. If the error persists, consider consulting a service center.
Why is “IN” flashing on my Kenwood Car Receiver?
If “IN” flashes on your Kenwood Car Receiver, it means that the CD player is not operating properly. Reinsert the disc correctly. If the condition does not improve, turn off the unit and consult your nearest service center.
What does TOC ERROR mean on Kenwood Car Receiver?
If “TOC ERROR” appears on your Kenwood Car Receiver, it could be due to a dirty, upside-down, or scratched CD. Try using another disc instead.
Why does my Kenwood Car Receiver say “NO DISC”?
If “NO DISC” appears on the display of your Kenwood Car Receiver, insert a playable disc into the loading slot.
General| Power Output | 50W x 4 |
|---|---|
| RMS Power Output | 22W x 4 |
| CD Player | Yes |
| USB Input | Yes |
| Bluetooth | No |
| Display Type | LCD |
| Playback | CD, MP3, WMA |
| Detachable Faceplate | Yes |
| Aux Input | Yes |
| Channels | 4 |
| Tuner | FM/AM |
Guide on removing and attaching the detachable front panel.
Steps to restore the unit to factory default settings.
How to disable the automatic display demonstration mode.
Instructions for enabling or disabling the demo mode.
Steps to set the current time on the unit.
Configuration of basic unit settings before first use.
How to adjust the frequency tuning increment for radio bands.
Customizing radio reception and tuning options.
Options for repeating tracks or the entire disc.
How to play disc tracks in a random order.
Enabling playback of short intros of disc tracks.
How to search and select specific tracks on an audio disc.
How the audio system mutes during an incoming phone call.
Adjusting audio control parameters like bass, treble, and balance.
Configuring various system settings, display, and auxiliary names.
Step-by-step guide for installing the unit in a vehicle.
Safety precautions during installation.
Important notes and advice for safe installation.
Diagram and instructions for connecting the unit's wiring.
Detailed steps for physically mounting the unit.
Technical specifications for the FM radio tuner.
Technical specifications for the AM radio tuner.
Technical specifications for the CD playback functionality.
Technical specifications for the audio output and amplifier.
Technical specifications for the auxiliary audio input.
General specifications including power, dimensions, and weight.
To Next Page
