To Next Page
R
Robert ChangSep 23, 2025
What to do if my Kenwood Car Receiver displays “NO MUSIC”.
- DDr. Emily Raymond DDSSep 23, 2025
If your Kenwood Car Receiver displays “NO MUSIC”, connect a USB device that contains playable audio files.
What to do if my Kenwood Car Receiver displays “NO MUSIC”.
If your Kenwood Car Receiver displays “NO MUSIC”, connect a USB device that contains playable audio files.
Why sound cannot be heard on my Kenwood Car Receiver?
If you cannot hear any sound from your Kenwood Car Receiver, first, adjust the volume to the optimum level. If the issue persists, check the cords and connections to ensure they are properly connected.
What to do if my Kenwood KDC-153R Car Receiver says “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON”?
If your Kenwood Car Receiver displays the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON”, turn the power off, check the wiring, and then turn the power back on.
What to do if my Kenwood Car Receiver displays “PLEASE EJECT”?
If your Kenwood Car Receiver shows “PLEASE EJECT”, reset the unit.
What to do if my Kenwood Car Receiver displays “NO DEVICE” or “READING” keeps flashing?
If your Kenwood Car Receiver displays “NO DEVICE” or “READING” keeps flashing, try reconnecting the Android device. If the USB connection does not work, connect the Android device through the auxiliary input jack.
What to do if my Kenwood KDC-153R Car Receiver displays “NO DEVICE”.
If your Kenwood Car Receiver displays “NO DEVICE”, connect a USB device and change the source to USB again.
What to do if my Kenwood Car Receiver displays “NA FILE”?
If your Kenwood Car Receiver displays “NA FILE”, ensure the disc or USB contains supported audio files.
What to do if my Kenwood Car Receiver displays “COPY PRO”?
If your Kenwood Car Receiver displays “COPY PRO”, it means a copy-protected file is being played from the disc or USB.
Why are correct characters not displayed on my Kenwood KDC-153R?
Your Kenwood Car Receiver can only display uppercase letters, numbers, and a limited number of symbols. Depending on the selected display language, some characters may not be displayed correctly.
Why source cannot be selected on my Kenwood KDC-153R Car Receiver?
If you are unable to select a source on your Kenwood Car Receiver, check the [SOURCE SELECT] setting.
General| Tuner | FM/AM |
|---|---|
| CD Playback | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | No |
| USB Input | Yes |
| Bluetooth | No |
| Display Type | LCD |
| Detachable Faceplate | Yes |
| AUX Input | Yes |
| Remote Control | Optional |
| Channels | 4 |
| Maximum output power | 4 x 50W |
| RMS Power Output | 22W x 4 |
| Pre-out voltage | 2.5V |
| Number of preset stations | 18 FM, 6 AM |
