What does 'READ ERROR' mean on my Kenwood Car Receiver and how to fix it?
If your Kenwood Car Receiver displays 'READ ERROR', copy the files and folders onto the USB device again. If the problem continues, reset the USB device or try using another USB device.
What to do if sound cannot be heard during playback on Kenwood Car Receiver?
If you're experiencing sound issues during playback on your Kenwood Car Receiver, try reconnecting the Android device. If in [HAND MODE], launch any media player application and start playback. Alternatively, relaunch the current media player application or use another media player application. You can also restart the Android device. If the problem persists, the connected Android device may be unable to route the audio signal to the unit.
What to do if Kenwood Car Receiver does not turn on?
If your Kenwood Car Receiver does not turn on, reset the unit.
How to improve radio reception on Kenwood Car Receiver?
If the radio reception is poor on your Kenwood Car Receiver, connect the antenna firmly and pull the antenna out all the way.
What to do if my Kenwood Car Receiver displays 'NO DEVICE' or 'READING' keeps flashing?
If your Kenwood Car Receiver displays 'NO DEVICE' or 'READING' keeps flashing, try these steps: - Switch off the developer options on the Android device. - Reconnect the Android device. If the problem continues, the connected Android device may not support [BROWSE MODE].
Why is the communication unstable on my Kenwood Car Receiver?
If you are experiencing unstable communication with your Kenwood Car Receiver, check the connection to the device.
What does 'LICENSE ERROR' mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “LICENSE ERROR”, you may be trying to access Pandora from a country where it is not available.
What does 'NOT CONNECTED' mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NOT CONNECTED”, it means that linking to the application is impossible.
How to fix 'iPod ERROR' on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “iPod ERROR”, try reconnecting the iPod. If that doesn’t work, reset the iPod.
Why is there no sound during playback on my Kenwood Car Receiver?
If you are experiencing no sound during playback on your Kenwood Car Receiver, try the following: - Reconnect the Android device. - If in [HAND MODE], launch any media player application from the Android device and start playback. - If in [HAND MODE], relaunch the current media player application or use another media player application. - Restart the Android device. If the problem persists, the connected Android device may be unable to route the audio signal to the unit.
Crucial safety advice for operation, volume, and handling the unit.
Instructions for cleaning the unit, connectors, and handling discs properly.
Identification and description of the faceplate controls and features.
Explanation of the functions and buttons on the RC-406 remote control.
Procedures for resetting the unit and replacing the remote control battery.
Guide to cancelling the demo mode and setting the initial system configuration.
Steps to set the clock time, format, and other initial system settings.
Options for key beep and enabling/disabling specific sources like Pandora and AUX.
How to search for stations, use direct access tuning, and manage radio settings.
Detailed tuner settings for memory, mono, news, regional, AF, TI, and PTY search.
Connecting and playing audio from an external device via the AUX input.
How to play, pause, seek, select tracks, folders, and manage repeat/random modes.
Switching between unit and device control for iPod and Android.
Selecting files from folders and using quick search features.
Configuring Android devices, including browse mode and music drive selection.
Installing the app, connecting, and starting Pandora playback.
Creating new stations and searching for registered Pandora stations.
How to bookmark songs and artists within the Pandora application.
Installing the app, connecting, and starting iHeartRadio playback.
Finding stations alphabetically, scanning, and deleting saved stations.
Accessing and navigating the primary audio control settings.
Adjusting EQ, Bass Boost, Loudness, Subwoofer, Fader, Balance, and Volume Offset.
Using the Sound Reconstruction feature to improve audio quality.
Adjusting color, dimmer, brightness, and text scrolling for the display.
Resolving common issues like no sound, wiring errors, and poor radio reception.
Troubleshooting problems with CD, USB, and iPod playback.
Resolving specific errors for CD, USB, iPod, and Android device connections.
Troubleshooting common connection and function errors for Pandora and iHeartRadio.
Details on playable media formats, discs, and USB device requirements.
Information on iPod/iPhone, Android, Pandora, and iHeartRadio compatibility.
How the unit handles phone calls and mutes audio playback.
Technical performance data for the FM/AM tuner and CD player.
Specifications for USB, audio output, and auxiliary input.
General operating parameters, dimensions, and weight of the unit.
Essential safety warnings and cautions for installing the unit.
Step-by-step instructions for in-dash mounting and alternative methods.
Guide on how to safely detach the unit from the dashboard.
Visual guide and explanation of all necessary wiring connections.
List of parts provided for the unit's installation.
General| Brand | Kenwood |
|---|---|
| Model | KDC-162U |
| Category | Car Receiver |
| Language | English |
To Next Page
