To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KDC-215S and is the answer not in the manual?
General| Power Output | 50W x 4 |
|---|---|
| RMS Power Output | 22W x 4 |
| Tuner | FM/AM |
| CD Playback | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | Yes |
| USB Input | Yes |
| Bluetooth | No |
| Preamp Voltage | 2.5V |
| Display Type | LCD |
| Detachable Faceplate | Yes |
| Aux Input | Yes |
| Remote Control | Optional |
| Channels | 4 |
| Number of Presets | 18 FM, 6 AM |
Use of controls or adjustments other than specified may result in hazardous radiation exposure.
This equipment may generate radio frequency energy and cause harmful interference if modified.
Equipment tested and found to comply with Class B digital device limits per FCC Rules.
This Class B digital apparatus complies with Canadian ICES-003.
Precautions to prevent injury or fire, such as proper wiring and handling.
Precautions to prevent damage to the machine, like grounding and avoiding heat/dust.
Information on connecting specific CD automatic changers and incompatibility.
Connecting the unit and CD changer incorrectly can cause damage.
Location and function of the reset button for troubleshooting.
How to clean dirty terminals on the unit or faceplate.
How to clean the front panel of the unit with a dry cloth.
Avoid hard cloths or volatile solvents to prevent scratches or peeling.
Instructions for cleaning the CD slot to prevent scratches.
Explanation of lens fogging and how to resolve it.
Do not load 3-inch CDs in the CD slot to prevent damage.
Precautions for handling CDs to prevent damage and sound issues.
How to clean dirty CDs using a soft cloth.
Avoid using CD accessories that can cause malfunction.
Instructions on how to remove a CD from the unit.
How to check new CDs for burrs that can cause playback issues.
Only use round CDs; special shapes may cause malfunction.
Guidelines for storing CDs properly to prevent damage.
Avoid using CDs with stickers on the label side to prevent damage.
How to turn the power on and off using the SRC/PWR OFF button.
How to adjust the volume using the up and down buttons.
Function to quickly turn down the volume and how to operate it.
How to switch between different operational modes like Tuner, CD, and Standby.
Function to amplify low and high tones at low volumes.
Adjusting sound quality parameters like bass, treble, balance, and fader.
Recalling preset audio settings for different music types.
Adjusting sound settings based on speaker types.
How to remove and reattach the detachable faceplate for theft prevention.
How to turn the clock display on and off.
Step-by-step guide to setting the clock time.
How to perform auto seek tuning and manual tuning for radio frequencies.
How to store and recall favorite radio stations using preset buttons.
Automatically storing receivable frequencies for easy recall.
Function to reduce multi-path noise by switching from stereo to mono.
How to insert, play, stop, and eject CDs.
Warnings about inserting CDs, including size restrictions.
Note on potential loading issues after immediate ejection.
Connecting and playing optional players or discs other than loaded CDs.
How to search forward or backward through tracks on a disc.
How to fast forward or reverse disc playback.
How to search forward or backward through discs in a changer.
How to repeat playing a track or the entire disc.
How to play the beginning of each track on a disc to find desired ones.
How to play the beginning of each disc on a changer to find desired ones.
How to play tracks on the current disc in random order.
How to play tracks on all discs in a changer in random order.
Information on storing and safely placing the remote control unit.
Instructions for using and replacing AAA batteries in the remote.
Store unused batteries out of reach of children; seek medical help if swallowed.
Notes on battery usage, life, and remote functionality.
How to adjust volume and switch modes using remote buttons.
How to use the attenuator function to quickly lower volume.
How to tune frequencies up or down using the remote.
How to select AM band or switch between FM bands using the remote.
How to search tracks and discs forward or backward on the remote.
How to pause and resume playback using the remote.
Visual representation of the included accessories.
List of accessories and their quantities.
Use only provided accessories to avoid unit damage.
Step 1: Remove ignition key and disconnect battery to prevent short circuits.
Steps 2-5: Connect wiring harness, speaker wires, and power wires correctly.
Steps 6-8: Install the unit in the car and press the reset button.
Connect ignition wire to a switched power source to prevent battery drain.
Replace blown fuses with the same rating after checking for shorts.
Prevent shorts by not letting unconnected wires touch metal.
Connect speaker wires correctly to avoid unit damage.
Mount the unit with a mounting angle of 30° or less.
To connect the Disc changer, consult its manual.
Connections for FM/AM antenna and power/antenna control wires.
Connection of the main wiring harness and speaker output terminals.
Connection of ignition, battery, and ground wires to the system.
Caution regarding connecting speakers to front/rear terminals.
Warning about connecting ignition/battery wires to the chassis.
Steps for installing the unit in Japanese-made cars, including frame removal.
Align unit holes with mounting bracket and secure with screws.
Do not use screws other than provided ones to avoid damage.
Avoid using excessive force with tools during installation.
Step-by-step guide to removing the hard rubber frame.
Step-by-step guide to removing the unit from its mounting.
Be careful to avoid injury from catch pins on the removal tool.
Using a specific screw (ø4 x 16 mm) to fasten the faceplate.
Never insert the taptite screw in any other hole to prevent damage.
Troubleshooting steps for power not turning on or low volume.
Troubleshooting steps for unresponsive buttons or poor sound quality.
Troubleshooting steps for poor radio reception or lost memory.
Troubleshooting steps for CD ejecting, skipping, or not playing.
Troubleshooting for issues with selecting or playing discs.
Troubleshooting for sound skips or specified tracks not playing.
Situations requiring service center consultation for disc changer or AUX mode issues.
Handling error codes related to disc magazines and CDs.
Handling error codes related to MD playback and faceplate removal.
Troubleshooting general malfunctions with reset or service center.
Handling high temperature error code by cooling the unit.
Detailed technical specifications for the FM and AM tuners.
Detailed technical specifications for the CD player section.
Detailed technical specifications for the audio output.
General specifications like operating voltage, current, and weight.
