Do you have a question about the Kenwood KDC-232MR and is the answer not in the manual?
frequency range | 87.9 MHz – 107.9 MHz |
---|---|
usable sensitivity | 9.3 dBf (0.8 μV /75 Ω) |
quieting sensitivity | 15.2 dBf (1.6 μV /75 Ω) |
frequency response | 30 Hz – 15 kHz |
signal to noise ratio | 70 dB |
selectivity | ≥ 80 dB |
stereo separation | 40 dB |
frequency range | 530 kHz – 1700 kHz |
---|---|
usable sensitivity | 28 dBμ (25 μV) |
spindle speed | 1000 – 400 rpm (CLV 2times) |
---|---|
signal to noise ratio | 105 dB |
MP3 decode | Compliant with MPEG-1/2 Audio Layer-3 |
WMA decode | Compliant with Windows Media Audio |
maximum output power | 45 W x 4 |
---|---|
full bandwidth power | 22 W x 4 |
speaker impedance | 4 - 8 Ω |
operating voltage | 14.4 V |
---|---|
current consumption | 10 A |
installation size | 182 x 53 x 155 mm |
weight | 3.1 lbs (1.40 kg) |
spindle speed | 500 – 200 rpm (CLV) |
---|---|
signal to noise ratio | 93 dB |
maximum output power | 50 W x 4 |
---|---|
full bandwidth power | 22 W x 4 |
speaker impedance | 4 - 8 Ω |
operating voltage | 14.4 V |
---|---|
current consumption | 10 A |
installation size | 182 x 53 x 155 mm |
weight | 3.1 lbs (1.40 kg) |
Covers electrical, laser safety, and general operating precautions for the unit.
Precautions against short circuits, fire, and the importance of professional installation.
Details playable MP3/WMA files, media, and character limits for names and tags.
Instructions for turning the unit on/off and selecting audio sources.
Adjusting bass, middle, treble levels, balance, and fader for audio tuning.
Configuring per-source volume adjustments and loudness compensation.
Instructions for removing and reattaching the detachable faceplate to prevent theft.
Steps to select tuner source and tune stations using manual or auto seek.
Saving favorite radio stations to preset buttons.
Selecting and playing stored radio stations.
Basic operations for playing CDs and audio files, including pause, play, and eject.
Explains HD Radio features replacing standard tuner functions.
Steps to select HD Radio source and tune into HD FM/AM bands.
Basic steps for entering, navigating, setting items, and exiting the menu system.
Setting a 4-digit security code to prevent theft and unauthorized use.
Steps to disable or remove the active security code.
Step-by-step guide for physically installing the unit in the vehicle.
Safety warnings about wiring, short circuits, and potential fire hazards during installation.
Details the purpose and connection points for each wire in the wiring harness.
Instructions for safely pulling the main unit out of the dashboard.
Solutions for power, source switching, memory, and TEL mute function failures.
Addressing no sound, low volume, distortion, and loudness compensation problems.
Resolving issues with disc playback, ejecting, and external control mode.