Do you have a question about the Kenwood KDC-232MR and is the answer not in the manual?
frequency range | 87.9 MHz – 107.9 MHz |
---|---|
usable sensitivity | 9.3 dBf (0.8 μV /75 Ω) |
quieting sensitivity | 15.2 dBf (1.6 μV /75 Ω) |
frequency response | 30 Hz – 15 kHz |
signal to noise ratio | 70 dB |
selectivity | ≥ 80 dB |
stereo separation | 40 dB |
frequency range | 530 kHz – 1700 kHz |
---|---|
usable sensitivity | 28 dBμ (25 μV) |
spindle speed | 1000 – 400 rpm (CLV 2times) |
---|---|
signal to noise ratio | 105 dB |
MP3 decode | Compliant with MPEG-1/2 Audio Layer-3 |
WMA decode | Compliant with Windows Media Audio |
maximum output power | 45 W x 4 |
---|---|
full bandwidth power | 22 W x 4 |
speaker impedance | 4 - 8 Ω |
operating voltage | 14.4 V |
---|---|
current consumption | 10 A |
installation size | 182 x 53 x 155 mm |
weight | 3.1 lbs (1.40 kg) |
spindle speed | 500 – 200 rpm (CLV) |
---|---|
signal to noise ratio | 93 dB |
maximum output power | 50 W x 4 |
---|---|
full bandwidth power | 22 W x 4 |
speaker impedance | 4 - 8 Ω |
operating voltage | 14.4 V |
---|---|
current consumption | 10 A |
installation size | 182 x 53 x 155 mm |
weight | 3.1 lbs (1.40 kg) |