Need help?Do you have a question about the Kenwood KDC-MP533V and is the answer not in the manual?
FM Tuner| frequency range (50 kHz space) | 87.5 MHz – 108.0 MHz |
|---|---|
| frequency range (200 kHz space) | 87.9 MHz – 107.9 MHz |
| usable sensitivity | 9.3dBf (0.8 μV /75 Ω) |
| quieting sensitivity | 15.2dBf (1.6 μV /75 Ω) |
| frequency response | 30 Hz – 15 kHz |
| signal to noise ratio (MONO) | 70 dB |
| selectivity | ≥ 80 dB |
| stereo separation | 40 dB |
AM Tuner| frequency range (9 kHz space) | 531 kHz – 1611 kHz |
|---|---|
| frequency range (10 kHz space) | 530 kHz – 1700 kHz |
| usable sensitivity | 28 dBμ (25 μV) |
Audio| maximum output power | 50 W x 4 |
|---|---|
| full bandwidth power | 22 W x 4 |
| speaker impedance | 4 - 8 Ω |
| tone action bass | 100 Hz ±8 dB |
| tone action middle | 1 kHz ±8 dB |
| tone action treble | 10 kHz ±8 dB |
| preout level / load | 2000 mV/10 kΩ |
| preout impedance | ≤ 600 Ω |
Auxiliary Input| frequency response | 20 Hz – 20 kHz |
|---|---|
| input maximum voltage | 1200 mV |
| input impedance | 100 kΩ |
CD Player| laser diode | GaAlAs |
|---|---|
| digital filter (D/A) | 8 Times Over Sampling |
| D/A converter | 1 Bit |
| spindle speed | 500 – 200 rpm (CLV) |
| wow & flutter | Below Measurable Limit |
| frequency response | 10 Hz – 20 kHz |
| total harmonic distortion | 0.01 % |
| signal to noise ratio | 93 dB |
| dynamic range | 93 dB |
| MP3 decode | Compliant with MPEG-1/2 Audio Layer-3 |
| WMA decode | Compliant with Windows Media Audio |
| video CD format | Version 1.1 |
| color system | NTSC/PAL |
| video output level | 1Vp-p/75 Ω |
General| operating voltage | 14.4 V |
|---|---|
| current consumption | 10 A |
| installation size | 182 x 53 x 155 mm |
| weight | 1.40 kg |
General safety advice to prevent injury, fire, or damage to the unit.
Selecting preset sound settings for different music genres.
Adjusting bass, middle, treble levels, and speaker balance.
Setting volume offset and loudness compensation for optimal sound.
Basic steps to enter, select items, and set options within the menu system.
Configuring the operation beep sound and automatic display dimming.
Explains basic functions of VOL, SRC, and ATT buttons on the remote.
Using AUD and VOL buttons for audio adjustments.
Operating tuner bands, seeking, presets, and disc playback controls.
Step-by-step guide for installing the unit and critical safety warnings.
Details connections for video output, AUX input, parking brake, and control wires.
Instructions for connecting speaker wires and power supply (ignition, battery, ground).
Steps to remove the hard rubber frame before unit removal.
Solutions for power, source selection, memory, TEL mute, and sound quality problems.
How to resolve poor radio reception problems.
Solutions for discs not playing, unable to eject, or not inserting.
Troubleshooting for audio file playback errors, skipping, and incorrect track time display.
Explains common error messages and system conditions displayed by the unit.
To Next Page
