Do you have a question about the Kenwood KDC-X879 and is the answer not in the manual?
FM frequency range | 87.9 MHz – 107.9 MHz |
---|---|
FM usable sensitivity | 9.3dBf (0.8 µV/75 Ω) |
FM quieting sensitivity | 15.2dBf (1.6 µV/75 Ω) |
FM frequency response | 30 Hz – 15 kHz |
FM signal to noise ratio | 70 dB |
FM selectivity | ≥ 80 dB |
FM stereo separation | 40 dB |
AM frequency range | 530 kHz – 1700 kHz |
---|---|
AM usable sensitivity | 28dBµ (25 µV) |
Laser diode | GaAlAs |
---|---|
Digital filter | 8 Times Over Sampling |
D/A converter | 1 Bit |
Spindle speed | 1000 – 400 rpm (CLV 2times) |
Frequency response | 10 Hz – 20 kHz |
Total harmonic distortion | 0.01 % |
Signal to noise ratio | 105 dB |
Dynamic range | 93 dB |
Channel separation | 95 dB |
MP3 decode | Compliant with MPEG-1/2 Audio Layer-3 |
WMA decode | Compliant with Windows Media Audio |
Maximum output power | 50 W x 4 |
---|---|
Full bandwidth power | 22 W x 4 |
Tone action bass | 100 Hz ±8 dB |
Tone action middle | 1 kHz ±8 dB |
Tone action treble | 12.5 kHz ±8 dB |
Preout level / load | 5000 mV/10 kΩ |
Preout impedance | ≤ 80 Ω |
Auxiliary frequency response | 20 Hz – 20 kHz |
---|---|
Auxiliary input maximum voltage | 1200 mV |
Auxiliary input impedance | 100 kΩ |
Operating voltage | 14.4 V |
---|---|
Current consumption | 10 A |
Installation size | 182 x 53 x 162 mm |
Weight | 1.9 kg |
FM frequency range | 87.9 MHz – 107.9 MHz |
---|---|
FM usable sensitivity | 9.3dBf (0.8 µV/75 Ω) |
FM quieting sensitivity | 15.2dBf (1.6 µV/75 Ω) |
FM frequency response | 30 Hz – 15 kHz |
FM signal to noise ratio | 70 dB |
FM selectivity | ≥ 80 dB |
FM stereo separation | 40 dB |
AM frequency range | 530 kHz – 1700 kHz |
---|---|
AM usable sensitivity | 28dBµ (25 µV) |
Laser diode | GaAlAs |
---|---|
Digital filter | 8 Times Over Sampling |
D/A converter | 1 Bit |
Spindle speed | 1000 – 400 rpm (CLV 2times) |
Frequency response | 10 Hz – 20 kHz |
Total harmonic distortion | 0.008 % |
Signal to noise ratio | 110 dB |
Dynamic range | 93 dB |
Channel separation | 95 dB |
MP3 decode | Compliant with MPEG-1/2 Audio Layer-3 |
WMA decode | Compliant with Windows Media Audio |
Maximum output power | 50 W x 4 |
---|---|
Full bandwidth power | 22 W x 4 |
Tone action bass | 60 Hz – 400 Hz ±9 dB |
Tone action middle | 500 Hz – 3.15 kHz ±9 dB |
Tone action treble | 4 kHz – 16 kHz ±9 dB |
Preout level / load | 5000 mV/10 kΩ |
Preout impedance | ≤ 80 Ω |
Auxiliary frequency response | 20 Hz – 20 kHz |
---|---|
Auxiliary input maximum voltage | 1200 mV |
Auxiliary input impedance | 100 kΩ |
Operating voltage | 14.4 V |
---|---|
Current consumption | 10 A |
Installation size | 182 x 53 x 163 mm |
Weight | 2.1 kg |
FM frequency range | 87.9 MHz – 107.9 MHz |
---|---|
FM usable sensitivity | 9.3dBf (0.8 µV/75 Ω) |
FM quieting sensitivity | 15.2dBf (1.6 µV/75 Ω) |
FM frequency response | 30 Hz – 15 kHz |
FM signal to noise ratio | 70 dB |
FM selectivity | ≥ 80 dB |
FM stereo separation | 40 dB |
AM frequency range | 530 kHz – 1700 kHz |
---|---|
AM usable sensitivity | 28dBµ (25 µV) |
Laser diode | GaAlAs |
---|---|
Digital filter | 8 Times Over Sampling |
D/A converter | 1 Bit |
Spindle speed | 1000 – 400 rpm (CLV 2times) |
Frequency response | 10 Hz – 20 kHz |
Total harmonic distortion | 0.008 % |
Signal to noise ratio | 110 dB |
Dynamic range | 93 dB |
Channel separation | 95 dB |
MP3 decode | Compliant with MPEG-1/2 Audio Layer-3 |
WMA decode | Compliant with Windows Media Audio |
Maximum output power | 50 W x 4 |
---|---|
Full bandwidth power | 22 W x 4 |
Tone action bass | 60 Hz – 150 Hz ±8 dB |
Tone action middle | 500 Hz – 2 kHz ±8 dB |
Tone action treble | 10 kHz – 17.5 kHz ±8 dB |
Preout level / load | 5000 mV/10 kΩ |
Preout impedance | ≤ 80 Ω |
Auxiliary frequency response | 20 Hz – 20 kHz |
---|---|
Auxiliary input maximum voltage | 1200 mV |
Auxiliary input impedance | 100 kΩ |
Operating voltage | 14.4 V |
---|---|
Current consumption | 10 A |
Installation size | 182 x 53 x 162 mm |
Weight | 1.9 kg |
Provides instructions for the CD-receiver.
Instructions for recording model and serial numbers.
Placeholder for the unit's serial number.
Precautions for safe operation and avoiding hazards.
Notes on FCC regulations and potential interference.
Precautions to prevent injury or fire during unit installation and use.
Precautions to prevent damage to the machine.
Information on connecting KENWOOD disc changers/CD players.
Notes on connecting LX AMP and sensor unit.
Warning against loading 3-inch CDs with adapters.
Advice to consult dealer for installation issues or unit malfunction.
Explains lens fogging and how to resolve it.
Instructions for cleaning the unit and faceplate.
Instructions for cleaning the faceplate terminals.
Recommendation for cleaning the CD slot.
Refers to tuner control features for Sirius operation.
Explanation of Dolby Pro Logic II technology and modes.
Guidelines for handling CDs to prevent damage.
Instructions for preparing new CDs with burrs.
How to remove CDs from the unit.
Information on discs that cannot be played.
Recommendations for storing CDs.
Warning against using disc type accessories.
Instructions for cleaning CDs.
Explanation of the unit's multi-function key system.
How to set functions using the key buttons.
How to switch between function groups.
Example of using the multi-function keys for Random Play.
Specifies acceptable media types for MP3/WMA.
Details acceptable file and folder name formats.
Recommended settings for MP3/WMA encoding and CD writing.
Information on displayable ID3 tag versions.
Guidelines for entering file and folder names.
Notes on writing MP3/WMA files to media.
Explanation of how files and folders are accessed during playback.
How to set up the sound field automatically using Easy mode.
Details on fine-tuning sound quality in PRO mode.
Instructions for turning the unit ON and OFF.
How to hide the control panel for security or convenience.
How to select the audio source for playback.
Instructions for adjusting the volume.
How to quickly reduce the volume.
How to select modes for the rotary volume knob.
How the audio system mutes during a call.
Instructions for switching display modes and side graphics.
How to switch the side graphic display content.
How to switch the text display content.
Details of text information displayed in the upper part.
Details of text information displayed in the lower part.
How to switch graphic and spectrum analyzer displays.
How to select and display wallpapers.
How to switch text display in Display B/C modes.
Instructions for switching text display in Display B/C modes.
How to attach titles to stations or CDs.
How to set the display when using Auxiliary input.
Instructions for adjusting the panel angle and position.
How the backpanel detaches to deter theft.
Select the audio source for adjustment.
Navigate to the Audio Control section.
Enter the Audio Control mode.
Select the specific audio adjustment item.
Choose the audio control item to adjust.
Adjust the selected audio control item.
Exit the Audio Control mode.
How to turn the subwoofer output ON or OFF.
Select the audio source for System Q settings.
Choose the music genre for sound setting.
Select the type of speakers installed.
Select the source for the Dual Zone channel.
Navigate to the Dual Zone System control section.
Enter the Dual Zone System control mode.
Select the item to adjust for Dual Zone System.
Exit the Dual Zone System control mode.
Select the source for the internal channel.
Details on adjusting audio settings.
Lists available audio control items and their ranges.
Select the Easy mode for audio setup.
Select the audio source for adjustment.
Navigate to the Audio Setup section.
Enter the Audio Setup mode.
Select the audio setup item to adjust.
Adjust the selected audio setup item.
Exit the Audio Setup mode.
Select the PRO mode for audio setup.
Select audio setup items for adjustment.
Adjust the selected audio setup item.
Exit the Audio Setup mode.
Select PRO mode for audio setup.
Select the source for adjustment.
Navigate to the Audio Setup section.
Enter the Audio Setup mode.
Select the audio adjustment item.
Adjust audio setup items.
Select the memory item to store settings.
Select the memory item (USER/INST).
Store adjusted audio setup values in memory.
Exit the Audio Setup mode.
Enter the Audio Setup mode for recalling memory.
Select the Recall section for memory.
Call memory value for Audio Setup.
Recall values from memory.
Exit the Audio Setup mode.
How to choose the tuning mode for the radio.
Steps for selecting radio stations.
How to tune to a specific frequency directly.
How to store stations in memory.
Automatically stores stations with good reception.
How to recall stored stations.
Enter SNPP mode to display and select stations.
How to change the order of displayed station names.
How to change the radio band.
Select the desired station.
How to cancel SNPP mode.
How to scroll displayed radio text.
Registering a Program Type for stations.
Confirming the registered Program Type.
How to exit PTY mode.
Storing and recalling Program Types.
How to preset a Program Type.
How to recall a preset Program Type.
Enter PTY mode for station selection.
Select the desired Program Type.
Search for stations based on Program Type.
Exit PTY mode.
Instructions for playing CDs and MP3/WMA discs.
Steps for opening the panel and inserting a disc.
Steps after a disc has been inserted.
How to pause and play tracks.
Instructions for ejecting a disc.
How to return the panel to its original position.
How to select discs or folders.
How to pause and play tracks.
How to fast forward or reverse tracks.
How to search for songs by track or file.
How to perform track/file search using the remote.
How to perform disc search using the remote.
How to repeat songs, discs, or folders.
How to play songs in random order.
How to play the beginning of each song.
How to play songs from all discs in random order.
Navigate to the Folder Select function.
Enter the Folder Select mode.
Displays the current folder name.
Displays the number of files in the folder.
Navigate through folder levels.
Select folders within the same level.
Return to the top level folder.
Scroll the folder name display.
Select the folder to play.
How to cancel Folder Select mode.
How to scroll CD text or MD title.
Select CDs displayed in DNPS of disc changer.
Enter DNPP mode.
Display forward/reverse information.
Select the desired disc.
How to cancel DNPP mode.
Select SIRIUS Satellite Radio mode.
Steps to select SIRIUS mode.
How to switch the seeking mode.
How to select a channel.
How to search for channels by category.
Navigate to the Channel Search function.
Select adjustment items for channel search.
How to tune channels directly.
Enter Direct Access Tuning mode.
Enter the channel number.
Perform channel search.
How to cancel Direct Access Tuning.
How to store channels in memory.
How to recall stored channels.
How to select the preset band.
How to scan for receivable channels.
How to scroll text for SIRIUS tuner.
How to select HD Radio stations.
Select the HD Radio source.
Select the HF band for tuning.
Select the HA band for tuning.
Tune up or down the radio band.
Automatically stores stations with good reception.
Select the band for Auto Memory Entry.
Enter the Menu mode.
Select the Auto Memory Entry mode.
Open Auto Memory Entry.
Exit the Menu mode.
Basic operation of Menu system functions.
Enter the Menu mode.
Select a menu item.
Set the selected menu item.
Exit the Menu mode.
How to set and use the security code for theft prevention.
Setting the operation check sound (beep) ON/OFF.
How to manually adjust the clock time.
Instructions for adjusting the date (day, month, year).
Select the date format mode.
Synchronize unit clock with RDS station time.
Display settings for the Disabled System Indicator.
Set button illumination color to green or red.
Set blinking mode for triangle indicator system.
Select the font for display.
How the display dims with the vehicle light switch.
Setting time until faceplate hides after power OFF.
Sets panel movement when at its end position.
Display System Q factors in Audio control.
Switches between Easy and PRO mode for Audio Setup.
Control mute function for the built-in amplifier.
Adjust bass boost level of external amplifier.
Set central frequency boosted by B.M.S.
Switches to traffic information automatically.
How to switch traffic information stations.
Switch reception from stereo to mono for noise reduction.
Sets the tuning mode for HD Radio.
Refer to Auto Memory Entry for operation method.
Setting the displayed text scroll.
Set the Built-in Auxiliary Input function.
Displaying the SIRIUS ID (Electronic Serial Number).
Play CD by force for special format CDs.
Download movies and wallpapers for display.
Insert CD-R/CD-RW with files for download.
Enter Standby mode.
Enter Menu mode.
Select the downloading mode.
Enter the downloading mode.
Select files to be downloaded.
Start the downloading process.
Cancel the downloading process.
Exit the downloading mode.
Control the LX AMP connected to the unit.
Set various items using the rotary volume knob.
Instructions for loading and replacing remote batteries.
Basic operations of the remote control.
Remote operations for Tuner source.
Remote operations for Disc source.
Remote operations for SIRIUS tuner source.
Remote operations for HD Radio source.
List of included accessories.
Step-by-step guide for installing the unit.
Terminal connections for KDC-X979.
Terminal connections for KDC-MP925.
Terminal connections for KDC-X879.
Installation procedure for non-Japanese cars.
Installation procedure for Japanese cars.
Fasten the faceplate to the main unit.
Instructions for removing the hard rubber frame.
Instructions for removing the unit from the car.
Troubleshooting common general issues.
Solutions for power not turning ON.
Solutions for inability to switch sources.
Solutions for memory erasure.
Solutions for no loudness effect.
Solutions for TEL mute function not working.
Solutions for TEL mute always ON.
Troubleshooting high-pitch compensation issues.
Troubleshooting unadjustable audio parameters.
Solutions for no sound or low volume.
Solutions for poor or distorted sound quality.
Troubleshooting subwoofer settings.
Solutions for Touch Sensor Tone not sounding.
Troubleshooting clock adjustment issues.
Troubleshooting Dimmer function issues.
Troubleshooting panel hiding issues.
Troubleshooting audio control effects.
Troubleshooting unexpected control panel movement.
Troubleshooting speaker sound issues with T-TONE.
Troubleshooting tuner reception issues.
Solutions for poor radio reception.
Troubleshooting direct frequency entry.
Troubleshooting traffic information sound volume.
Troubleshooting issues related to disc sources.
Troubleshooting "AUX EXT" display.
Troubleshooting discs not playing correctly.
Troubleshooting CD ejection issues.
Solutions for inability to remove a disc.
Troubleshooting disc insertion issues.
Troubleshooting Direct Search function.
Troubleshooting Track Search function.
Troubleshooting MP3/WMA playback issues.
Solutions for MP3/WMA playback failure.
Solutions for sound skipping during MP3/WMA playback.
Troubleshooting MP3/WMA track time display.
Troubleshooting HD Radio reception issues.
Solutions for no sound or low volume in HD Radio.
Situations requiring service center consultation.
System condition messages and their meanings.
Explanation of Hold Error due to high temperature.
Explains issues related to missing names for DNPS/SNPS/ID3 tags.
Indicates when radio text data is being received.
Indicates discs are being exchanged in the changer.
Indicates the unit is reading disc data.
Indicates issues with Disc Changer DNPP.
Indicates CD player malfunction.
Indicates an unsupported MP3/WMA file format.
Indicates a copy-protected file is played.
Indicates download errors or unit malfunction.
No downloadable files found on CD-ROM.
Selected file format cannot be read by the unit.
Writing failed during file download.
Indicates the Demonstration mode has been selected.
Technical specifications for the FM tuner.
Technical specifications for the AM tuner.
Technical specifications for the CD player.
Technical specifications for the audio output.
Technical specifications for the auxiliary input.
General specifications like operating voltage and dimensions.