S
Steven RuizSep 9, 2025
What does “NA FILE” mean on my Kenwood KDV-MP3346?
- DDavid BowmanSep 9, 2025
If “NA FILE” appears on the display of your Kenwood Car Receiver, the unit is playing an unsupported audio file.
To Next PageTo Next PageWhat does “NA FILE” mean on my Kenwood KDV-MP3346?
If “NA FILE” appears on the display of your Kenwood Car Receiver, the unit is playing an unsupported audio file.
Why is the radio reception poor on my Kenwood Car Receiver?
If you're experiencing poor radio reception with your Kenwood Car Receiver, make sure the antenna is firmly connected. Additionally, try pulling the antenna out all the way to improve signal strength.
What to do if my Kenwood Car Receiver does not work?
If your Kenwood Car Receiver isn't working, try resetting the unit.
What to do if “PROTECT” appears on Kenwood Car Receiver display?
If “PROTECT” is displayed on your Kenwood Car Receiver and no operations can be performed, ensure the terminals of the speaker leads are covered with insulating tape properly. Then, reset the unit.
Why do “PLEASE” and “EJECT“ appear on Kenwood KDV-MP3346 Car Receiver display?
If “PLEASE” and “EJECT” appear alternately on the display of your Kenwood Car Receiver, press 0, then insert a disc correctly. It may be that the disc is quite dirty, inserted upside down, severely scratched, or unreadable.
What to do if PLEASE and EJECT appear alternately on the Kenwood KDV-MP3346 display?
If “PLEASE” and “EJECT” appear alternately on the display of your Kenwood Car Receiver, insert a disc that contains tracks of appropriate formats.
Why can't tracks play back as intended on my Kenwood KDV-MP3346 Car Receiver?
If tracks cannot play back as you intended them to play on your Kenwood Car Receiver, know that the playback order is determined when files are recorded.
Why does my Kenwood KDV-MP3346 Car Receiver display incorrect characters?
If your Kenwood Car Receiver displays incorrect characters (e.g., album name), it is because this unit can only display letters (upper case), numbers, and a limited number of symbols.
Why does my Kenwood Car Receiver have a longer readout time?
If your Kenwood Car Receiver requires a longer readout time and “READING” keeps flashing, it may be due to the complexity of the folder/file configuration. Avoid using too many hierarchies and folders.
What does it mean when “IN” flashes on my Kenwood KDV-MP3346 Car Receiver?
If “IN” flashes on the display of your Kenwood Car Receiver, reinsert the disc because the CD player is not operating properly.
Guidelines for handling the control panel and procedures for resetting the unit.
Steps to disable the unit's automatic display demonstration mode.
Instructions for accurately setting the current time on the unit.
Procedure for correctly inserting batteries into the remote controller.
Guide to essential settings before first-time operation for optimal performance.
Overview of the main unit's buttons, display, and input jacks.
Explanation of remote control functions and mode operations.
Customizing radio reception modes, automatic tuning, and preset station management.
How to manually store FM/AM stations and change tuning steps.
Adjusting display content and using the remote for station selection.
Details on playable disc types including DVD, CD, and recordable formats.
Important considerations and warnings when playing DualDiscs.
Instructions for starting disc playback, source selection, and playback indicators.
Procedure to verify the Macrovision version for DVD playback.
Using the control panel for playback, pause, stop, and navigation.
Choosing playback modes like random or repeat, and navigating folders/tracks.
Cycling through various display information screens during playback.
Utilizing the remote controller for playback navigation and control.
Controlling playback speed, image zoom, and camera angles.
Selecting subtitle languages and changing audio streams or channels.
Using direct search to locate specific titles, chapters, or tracks.
Interacting with DVD and DVD-VR disc menus for content selection.
Procedure to stop and exit the PBC (Playback Control) playback.
Interpreting and using the information and operation bars on the display.
Navigating the control screen and selecting files for playback.
Steps for inputting specific time or numeric data.
Configuring repeat play for tracks/folders and random playback options.
Accessing and adjusting disc-specific setup options.
Method for selecting files from a displayed list.
Instructions for connecting and playing audio from external components via AUX.
Adjusting subwoofer output levels and the bass boost feature.
Choosing preset sound modes (Natural, Rock, Pop, etc.) for optimal listening.
Fine-tuning audio balance, treble, fader, and adjusting display brightness.
Setting source-specific volume offsets and configuring the Low-Pass Filter.
Solutions for common problems like 'PROTECT' mode, no sound, or unit failure.
Tips for improving radio reception quality and reducing static noise.
Resolving issues related to disc reading, playback interruptions, and errors.
Addressing 'NO DISC', 'EJECT' messages, and region code restrictions.
Resolving problems with unsupported file formats, playback order, and character display.
Instructions for cleaning the unit's exterior, control panel, and connectors.
Guidelines for handling, cleaning, and storing discs to ensure optimal playback.
List of disc types that should not be used to prevent damage or malfunction.
Technical data for audio/video output, input, and tuner performance.
Technical details for the DVD/CD player section and general unit parameters.
Overall specifications including power, dimensions, and temperature.
General| Brand | Kenwood |
|---|---|
| Model | KDV-MP3346 |
| Category | Car Receiver |
| Language | English |
