To Next Page
S
Sarah CannonAug 8, 2025
How to adjust the height of the whisk or K-beater on a Kenwood KM300?
- TTracey JohnsonAug 8, 2025
To adjust the height of the whisk or K-beater on your Kenwood Mixer: First, unplug the mixer. Then, raise the mixer head and insert the whisk or beater. Hold it in place while loosening the nut. Lower the mixer head and adjust the height by turning the shaft until the whisk or K-beater is almost touching the bottom of the bowl. Finally, raise the head again, hold the whisk or K-beater, and tighten the nut.
General
