To Next PageTo Next PageWhat to do if my Kenwood KMM-BT322 Receiver says 'NO DEVICE' or 'READING' keeps flashing?
If you see “NO DEVICE” or “READING” flashing, try these steps: first, switch off the developer options on your Android device. If that doesn't work, try reconnecting the Android device.
What does 'NA FILE' mean on my Kenwood Receiver?
If you see the message “NA FILE”, it means you should make sure the media you're using contains supported audio files.
Why is there no sound coming from my Kenwood KMM-BT322 Receiver?
If you can't hear any sound, first adjust the volume to the desired level. If that doesn't work, check the cords and connections to ensure they are properly connected.
What to do if my Kenwood Receiver says 'MISWIRING CHECK WIRING Turn the power off, then check to be sure the THEN PWR ON'?
If the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the THEN PWR ON” appears, turn off the power. Check to ensure the terminals of the speaker wires are properly insulated, then turn the power back on.
How to fix Bluetooth pairing issues on my Kenwood KMM-BT322 Receiver?
If you're having trouble pairing a Bluetooth device, ensure that you've entered the same PIN code on both the Kenwood unit and the Bluetooth device. If the problem persists, delete the pairing information from both devices and try pairing them again.
Why is no Bluetooth device detected by my Kenwood KMM-BT322 Receiver?
If your Kenwood Receiver isn't detecting a Bluetooth device, try searching for the device again from the Bluetooth device itself. If that doesn't work, try resetting the unit.
What does 'CH LOCKED LOCK CODE?' mean on my Kenwood KMM-BT322 Receiver?
If your Kenwood Receiver displays “CH LOCKED LOCK CODE?”, you need to enter the correct pass code to unlock it.
What does 'ADD ERROR' mean on my Kenwood KMM-BT322?
The message “ADD ERROR” indicates that creating a new station was unsuccessful.
What does 'THUMBS N/A' mean on my Kenwood KMM-BT322 Receiver?
The message “THUMBS N/A” means that registration of thumbs up/thumbs down is not allowed.
What does 'NO STATIONS' mean on my Kenwood KMM-BT322 Receiver?
The message “NO STATIONS” indicates that no stations were found.
Guides through language, clock, date, and initial settings.
Searching, alerts, multicast channels, and advanced tuner settings.
Connecting, controlling, and playing music from portable devices.
Initial activation, subscription, and channel selection procedures.
Pairing devices, supported profiles, and handling incoming calls.
Optimizing sound staging and inputting vehicle parameters.
Diagnosing sound, power, broadcast, and media playback issues.
Resolving connection problems for various services and Bluetooth.
Essential safety precautions and general installation steps.
Methods for installing the unit into a vehicle and detaching it.
Detailed wiring diagrams and connecting external devices.
General