P
pereznicoleSep 6, 2025
Why is my Kenwood KMR-D382BT showing “NO SIGNAL”?
- LLindsey AndersonSep 6, 2025
If your Kenwood Car Receiver displays “NO SIGNAL”, make sure the antenna is mounted outside the vehicle.
To Next PageTo Next PageWhy is my Kenwood KMR-D382BT showing “NO SIGNAL”?
If your Kenwood Car Receiver displays “NO SIGNAL”, make sure the antenna is mounted outside the vehicle.
What does “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals THEN PWR ON” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals THEN PWR ON”, turn the power off and ensure that the terminals of the speaker wires are properly insulated. Then, turn the power on again.
What does “PROTECTING SEND SERVICE” mean on Kenwood KMR-D382BT?
If your Kenwood Car Receiver displays “PROTECTING SEND SERVICE”, send the unit to the nearest service center.
How to fix Kenwood KMR-D382BT Car Receiver when it does not work at all?
If your Kenwood Car Receiver is not working at all, try resetting the unit.
What does “NO DISC” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NO DISC”, insert a playable disc into the loading slot.
What does “UNSUPPORTED DEVICE” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “UNSUPPORTED DEVICE”, check that the connected USB device is compatible with the unit and that the file systems are in a supported format. You can also try reattaching the USB device.
What to do if “CH LOCKED LOCK CODE?” appears on Kenwood KMR-D382BT?
If your Kenwood Car Receiver displays “CH LOCKED LOCK CODE?”, enter the correct pass code to unlock.
Why is my Kenwood Car Receiver showing “CHECK ANTENNA”?
If your Kenwood Car Receiver displays “CHECK ANTENNA”, verify that the antenna and its connection are in good condition.
Why is my Kenwood KMR-D382BT Car Receiver showing “SWITCHING NG”?
If your Kenwood Car Receiver displays “SWITCHING NG”, it may indicate that the connected phones do not support the phone switching feature.
What to do if “SET ERROR”/“DEL ERROR” appears on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “SET ERROR” or “DEL ERROR”, turn the power off, then turn it back on, and perform the operation again.
General| Brand | Kenwood |
|---|---|
| Model | KMR-D382BT |
| Category | Car Receiver |
| Language | English |
