Need help?Do you have a question about the Kenwood KRC-PS959R and is the answer not in the manual?
Details compatibility with specific CD automatic changers.
Information on Radio Data System features and indicators.
Instructions for operating the unit via a steering remote control.
Details on functions and buttons of the remote control.
Explanation of the retractable faceplate for security and convenience.
Description of the K2i system for improved reception.
How to choose between auto seek, preset seek, and manual tuning.
Storing and recalling radio station frequencies.
Automatically stores receivable frequencies in the band.
Entering frequencies directly for quick station access.
Explanation of the digital information system for radio.
Adjusting sound quality parameters like Bass, Treble, Fader.
Registering and using a security code to protect the unit.
Instructions for connecting the ISO connector based on vehicle setup.
Common problems, their causes, and solutions.
Troubleshooting specific issues related to disc control.
Explanation of system messages and recommended actions.
FM Tuner Section| FM frequency range | 87.5 MHz – 108.0 MHz |
|---|---|
| FM usable sensitivity | 0.7 µV/75 Ω |
| FM quieting sensitivity | 1.6 µV/75 Ω |
| FM frequency response | 30 Hz – 15 kHz |
| FM signal to noise ratio | 65 dB |
| FM selectivity | ≥ 80 dB |
| FM stereo separation | 35 dB |
MW Tuner Section| MW frequency range | 531 kHz – 1611 kHz |
|---|---|
| MW usable sensitivity | 25 µV |
LW Tuner Section| LW frequency range | 153 kHz – 281 kHz |
|---|---|
| LW usable sensitivity | 45 µV |
Cassette Player Section| Tape speed | 4.76 cm/sec |
|---|---|
| Wow and flutter | 0.08 % |
| Cassette frequency response | 30 Hz – 20 kHz (±3 dB) |
| Cassette separation | 40 dB |
| Signal to noise ratio (Dolby NR OFF) | 57 dB |
| Signal to noise ratio (Dolby B NR ON) | 65 dB |
| Signal to noise ratio (Dolby C NR ON) | 73 dB |
Audio Section| Maximum output power | 40 W × 4 |
|---|---|
| Output power (DIN 45324, +B=14.4 V) | 27 W × 4 |
| Bass tone action | 100 Hz ±10 dB |
| Treble tone action | 10 kHz ±10 dB |
| Preout level / load (KRC-PS959R,859C/W) | 4 V / 10 kΩ |
| Preout level / load (KRC-859R,759R) | 1800 mV / 10 kΩ |
| Preout impedance (KRC-PS959R,859C/W) | 80 Ω |
| Preout impedance (KRC-859R,759R) | ≤ 600 Ω |
General Specifications| Operating voltage | 14.4 V (11 – 16 V allowable) |
|---|---|
| Current consumption | 10 A at Rated power |
| Installation size (W × H × D) | 182 × 53 × 161 mm |
| Weight | 1.8 kg |
To Next Page
