To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KRF-V5300D-S and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 5.1 |
| Power Output | 100 W per channel |
| Power Output (impedance) | 8 Ohms |
| Power Output (test condition) | 1 kHz, 0.7% THD |
| Surround Sound Formats | Dolby Digital, DTS |
| Input Sensitivity | 200 mV |
| Input Impedance | 47 kOhms |
| Signal-to-Noise Ratio | 98 dB |
| Tuner Bands | AM/FM |
| Video Inputs/Outputs | Composite |
| Digital Audio Inputs | 1 Coaxial, 2 Optical |
| Input Connectors | RCA, Optical, Coaxial |
| Output Connectors | RCA, S-Video |
| Dimensions (W x H x D) | 440 x 143.5 x 303 mm |
| Total Harmonic Distortion (THD) | 0.7% (1 kHz) |
| Audio Inputs/Outputs | RCA |
Shows the main block diagram and details of the power supply and AV-1 section.
Details the microprocessor (IC601) and RDS demodulator (IC761) circuits.
Explains the digital signal processing (IC401) and volume control (IC151) circuits.
Details the analog function switch (IC121) and input selector circuits.
Shows amplifier driver circuits and protection mechanisms.
Covers amplifier circuits (IC171, IC181, IC191) and identifies critical components.
Details the front and surround amplifier driver stages (IC1, IC2).
Explains the bias circuits for the front and surround amplifier stages.
Details rated output power, frequency response, input sensitivity, and tone control ranges.
