To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KRF-V6020 and is the answer not in the manual?
General| Number of Channels | 5.1 |
|---|---|
| Frequency Response | 20Hz to 70kHz |
| Input Sensitivity | 200mV/47k ohms |
| Video Connections | Composite |
| Tuning range | FM |
| Speaker load impedance | 8 ohms |
| Dimensions (metric) | 440 x 143 x 303mm |
| Power Output | 100 watts per channel into 8Ω (stereo) |
| Power Output (alt) | 100 watts per channel into 8Ω (stereo) |
Guidance for setting the AC voltage selector switch on the rear panel to match your line voltage.
List of included accessories with the unit, such as antennas and remote control.
Key warnings regarding fire, electric shock, rain, moisture, and voltage for safe operation.
Information on FCC compliance for radio frequency energy and potential interference in residential installations.
Details the four sections of the manual: Preparations, Operations, Other, and Remote Control.
Details the remote's ability to operate other audio/video components with setup procedures.
Describes various surround modes for enhanced audio enjoyment with video software.
Highlights DSP sound fields and DVD 6-channel input for immersive audio experiences.
Details the POWER and ON/STANDBY keys, and the STANDBY indicator for unit power management.
Covers BAND, AUTO, MEMORY keys, and VOLUME CONTROL knob for audio and radio functions.
Explains SPEAKERS A/B and MUTE keys for managing sound output and muting.
Details VIDEO 2/MONITOR, SOURCE DIRECT, LISTEN MODE, SETUP, MULTI CONTROL, and INPUT SELECTOR keys.
Details POWER, MACRO, VIDEO, TV, and AUDIO selector keys for unit and component control.
Explains FUNCTION SHIFT, TUNING/SKIP, SUBWOOFER, and Numeric keys for various operations.
Details LISTEN MODE, SOUND, SETUP, and MULTI CONTROL keys for audio and surround settings.
Details numeric, component operation, DISC SKIP, BAND, and AUTO keys for unit functions.
Explains TUNING, P.CALL, LISTEN MODE, MUTE, and SOUND keys for radio and audio adjustments.
Covers MULTI CONTROL, DVD CONT, POWER, SOURCE DIRECT, VOLUME, and SETUP keys.
Explains SYSTEM CONTROL jacks and modes for KENWOOD audio component system operations.
Provides guidelines for proper ventilation space around the unit for optimal operation.
Details how to use the VIDEO 2/MONITOR jacks as either VIDEO 2 or MONITOR inputs.
Instructions for connecting a DVD player's 6-channel output for surround sound playback.
Guide for connecting AM loop and FM indoor/outdoor antennas for optimal reception.
Details remote control, automatic operation, and synchronized recording via system control.
Instructions for changing the system control mode from SL16 to XS8 via the rear panel switch.
Guide for registering setup codes for KENWOOD audio components with the remote control.
Guidance on connecting speakers with appropriate impedance ratings to prevent damage.
Instructions for connecting external power amplifiers to the receiver's PRE OUT jacks.
Recommendations for optimal placement of front, center, surround speakers, and subwoofer.
Procedure to adjust radio channel spacing for AM/FM reception in different regions.
Instructions for loading batteries and operating the remote control unit.
Guide to configuring speaker settings like subwoofer, center, and surround for optimal sound.
Instructions for installing batteries and operating the RC-R0711 remote control.
Steps to power on the receiver and related audio/video components before playback.
Guide to selecting TAPE/MD, speaker systems (A/B), and VIDEO 2/MONITOR settings.
Instructions on selecting audio/video sources using the INPUT SELECTOR knob and remote keys.
Guide to initiating playback from the selected source and adjusting the volume.
Details adjusting bass, treble, and applying bass boost for desired sound quality.
Enables direct audio pass-through to the amplifier, bypassing processing.
Instructions on how to switch to headphone listening by turning off speakers.
Steps for recording music from various sources to a cassette deck.
Guide to copying tapes between cassette decks using MONITOR or TAPE settings.
Details using the MONITOR function with cassette decks or graphic equalizers for sound comparison.
Instructions for setting up and recording video sources using the VIDEO2 setting.
Procedure for manually tuning and storing radio stations into memory presets (1-40).
How to select and receive stored radio stations using numeric keys or P.CALL.
Guide to receiving preset radio stations sequentially using P.CALL keys.
Explains the Dolby Pro Logic surround format for theater-like sound from encoded sources.
Describes Dolby 3 Stereo mode for systems without surround speakers, redirecting sound to front channels.
Details how DSP modes add concert or hall atmosphere to program sources like CD and FM.
Steps to prepare for surround sound playback, including component setup and input selection.
Guide to choosing LISTEN MODE settings like Dolby Pro Logic, Dolby 3 Stereo, or DSP modes.
Instructions for connecting and playing DVD players with 6-channel output for surround sound.
Details on adjusting volume, sound quality, and levels for DVD 6-channel playback.
Allows further sound adjustments during surround playback, including BASS, TREB, and speaker levels.
Procedure to adjust input level when the monitor function is active, especially if levels are too high.
Instructions on using the SUBWOOFER key and VOLUME key to adjust subwoofer volume.
Guide to changing the receiver's display brightness using the DIMMER key.
Details items deleted from memory if power is disconnected for approximately 3 days.
Steps to reset the microcomputer for US and Canadian models by holding the POWER key.
Steps to reset the microcomputer for other countries using ON/STANDBY and POWER keys.
Resolves common amplifier problems like no sound, blinking indicators, and humming noises.
Addresses issues with radio station reception, interference, and preset station access.
Solutions for when the remote control unit is not operating correctly, including battery checks.
Details rated power output for VR-306, VR-305, VR-355 during STEREO and SURROUND operations.
Lists total harmonic distortion, frequency response, signal-to-noise ratio, and impedance for audio inputs.
Details video input and output specifications, including composite video.
Provides specifications for FM tuning range, sensitivity, distortion, signal-to-noise, and separation.
Lists specifications for AM tuning range, usable sensitivity, and signal-to-noise ratio.
Details power consumption, AC outlet types, and switched outlets for different regions.
Provides physical dimensions and net weight for the receiver models.
Details power output for KRF-V6020/V5020 during STEREO and SURROUND operations in other regions.
Lists audio performance metrics for KRF models in other countries, like distortion and noise ratio.
Details video I/O and FM/AM tuner specifications for KRF models in other countries.
Details power consumption and AC outlet configurations for KRF models in other countries.
Provides physical dimensions and net weight for KRF models in other countries.
