To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KRF-V5090D and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Frequency Response | 10Hz-100kHz (+0dB, -3dB) |
| Speaker load impedance | 8 ohms |
| Power Output | 100 W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD) |
| Tuning range | FM, MW |
| Total Harmonic Distortion (THD) | 0.7% |
| Input Sensitivity | 200mV (line) |
| Surround output | 100W (front), 100W (center), 100W (rear) |
| Input sensitivity MM | 2.5 mV |
| Signal to noise ratio MM | 80 dB |
| Digital inputs | Optical, Coaxial |
| Video Connections | Composite Video |
Lists all included accessories such as antennas, remote control, and batteries.
Instructions to reset the microcomputer to restore normal operation after malfunction.
Component layout diagram for the PC board identified as X25-6730-10.
Component layout diagram for side A of the X08-3420-10 PC board.
Component layout diagram for side B of the X08-3420-10 PC board.
Component layout diagrams for various PC boards and their connector designations.
Component layout diagram for the X14-7930-10 A/2 PC board with control elements.
Schematic details for optical, coaxial, and various video input/output circuits.
Schematic for the digital audio decoder and oscillator integrated circuits.
Schematic for the system configuration and control logic.
Schematic details for integrated circuits IC601, IC603, and IC604.
Guidelines for replacing safety-critical components to prevent fire or shock.
Instructions for accurate DC voltage measurement on the product.
Schematic of the power transformer and control signal routing.
Details on the functions assigned to front panel buttons and modes.
Safety warnings and DC voltage measurement guidelines.
Exploded view showing the location and identification of major unit components.
Comprehensive list of parts, their numbers, descriptions, and destinations.
Continuation of the comprehensive parts list with detailed component information.
Detailed listing of resistors and capacitors with their part numbers and specifications.
List of integrated circuits and transistors with their part numbers and types.
Listing of diodes, Zener diodes, and optical components.
Detailed listing of diodes and transistors used in the unit.
Details on integrated circuits and functional electronic modules.
Listings for pin jacks, AC outlets, fuses, and phase compensation coils.
Details on power transformers and crystal resonators.
Parts list for display elements and various semiconductor devices.
Listing of transistors and integrated circuits.
Listing of indicators, integrated circuits, and transistors.
Parts for the video input circuit, including capacitors and connectors.
Detailed specifications for audio output, input, video, and tuner sections.
Specifications for power, dimensions, weight, and general operational notes.
Listing of various resistors, capacitors, and diodes with their part numbers.
Details on integrated circuits, transistors, connectors, and switches.
Further listings of resistors, capacitors, and connectors with part details.
Details on switches and other specialized components.
Comprehensive listing of diodes and transistors used in the unit.
Details on integrated circuits and functional electronic modules.
Parts list for display elements and various semiconductor devices.
Listing of transistors and integrated circuits.
Listing of indicators, integrated circuits, and transistors.
Parts for the video input circuit, including capacitors and connectors.
Detailed listing of diodes and transistors.
Details on integrated circuits and electronic modules.
Listing of final semiconductor components, ICs, transistors, and video input parts.
Key to understanding the destination codes used in the parts list.
