Kenwood KRF-V5090D Instruction Manual

AUDIO VIDEO SURROUND RECEIVER
KRF-V6090D
KRF-V5090D
INSTRUCTION MANUAL
KENWOOD CORPORATION
B60-5533-00 01 CS (X) 0409
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this model has several operation
modes. These modes enable the remote control to control other KENWOOD DVD players. In order to
effectively use the remote control it is important to read the operating instructions and obtain a proper
understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation
modes may result in incorrect operations.
This instruction manual is for some models. Model availability and features
(functions) may differ depending on the country and sales area.
5533/01-06/EN 05.2.16, 2:50 PM1

Kenwood KRF-V5090D Specifications

General

Channels	5.1
Frequency Response	10Hz-100kHz (+0dB, -3dB)
Speaker load impedance	8 ohms
Power Output	100 W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Tuning range	FM, MW
Total Harmonic Distortion (THD)	0.7%
Input Sensitivity	200mV (line)
Surround output	100W (front), 100W (center), 100W (rear)
Input sensitivity MM	2.5 mV
Signal to noise ratio MM	80 dB
Digital inputs	Optical, Coaxial
Video Connections	Composite Video