Kenwood KRF-V5020 User Manual

Operations
PreparationRemote Control Other
1
KRF-V7020/V6020/V5020 (En/T)
AUDIO VIDEO SURROUND RECEIVER
KRF-V7020
KRF-V6020
KRF-V5020
INSTRUCTION MANUAL
KENWOOD CORPORATION
About the supplied remote control (RC-R0508) . . .
Compared to standard remote controls, the remote control supplied with this receiver has several
operation modes. These modes enable the remote control to control other audio/video components. In
order to effectively use the remote control it is important to read the operating instructions and obtain a
proper understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation
modes may result in incorrect operations.
This instruction manual is for some models.
Model availability and features (functions) may differ depending on the country and sales area.
B60-4155-00 02 MA (T,E2,Q)
OC
9809

Kenwood KRF-V5020 Specifications

General

Power Output	100 watts per channel into 8Ω (stereo)
Frequency Response	10Hz to 70kHz
Total Harmonic Distortion	0.7%
Input Sensitivity	2.5 mV (MM), 200 mV (line)
Signal-to-Noise Ratio	75 dB (MM), 95 dB (line)
Dimensions	440 x 143 x 303mm
Weight	7.7kg
Video Connections	Composite video input/output
Tuning range	FM

Summary

Getting Started Guide

Before Applying Power

Instructions on how to prepare the unit before connecting to power.

Safety Precautions

Essential safety warnings and cautions for operating the appliance.

System Setup and Component Connections

Connecting Audio Components

Guide for connecting various audio input devices to the receiver.

Connecting Video and Antenna Sources

Connecting Video Components

Instructions for connecting video sources like VCRs and DVD players.

Connecting DVD 6-Channel Input

System Control and Interconnection

System Control Operations

How to use system control cords for synchronized operations and automatic functions.

Speaker Installation and Impedance

Connecting Speakers

Detailed instructions on connecting front, center, and surround speakers.

Surround Sound Setup

Speaker Configuration for Surround

Configuring subwoofer, center, and surround speaker settings for optimal sound.

Surround Sound Calibration

Speaker Calibration: Volume and Distance

Normal Playback Introduction

Playback Preparation Steps

Listening to Audio/Video Sources

Selecting Input Sources

Audio Sound Adjustments

Tone and Bass Boost Control

Audio and Video Recording

Recording Procedures

Step-by-step instructions for recording audio and video sources.

Radio Listening Guide

RDS (Radio Data System) Features

RDS Auto Memory Tuning

Automatic RDS Station Storage

Automatically storing up to 30 RDS stations into preset memory.

Manual Radio Presets

Manually Storing Radio Stations

PTY Program Type Search

Searching Stations by Program Genre

Automatically searching for stations broadcasting a specific program type (genre).

EON Information Reservation

EON Program Reservation Function

RDS EON and TI Volume Features

EON Function Operation Details

TI Volume Adjustment

Sound Ambience Effects

DSP and Dolby Surround Modes Explained

Explanation of DSP, Dolby Pro Logic, and Dolby 3 Stereo surround sound modes.

DVD 6-Channel Audio Mode

Surround Sound Playback Modes

Selecting Listening Modes

Using the LISTEN MODE key to select Dolby Pro Logic, Dolby 3 Stereo, or DSP modes.

DVD 6-Channel Playback Guide

Connecting and Playing DVD 6CH Source

Steps to connect and play DVD software using the 6-channel input.

Troubleshooting and Error Resolution

Microcomputer Reset Procedure

Procedure to reset the unit's microcomputer in case of malfunction.

Amplifier Troubleshooting Steps

Common amplifier symptoms, their causes, and recommended remedies.

Receiver Technical Specifications

Audio/Video Section Specifications

Detailed technical data for audio and video sections, including power output and sensitivity.

Tuner and General Specifications