EasyManua.ls Logo

Kenwood krf v5080d User Manual

Kenwood krf v5080d
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AUDIO VIDEO SURROUND RECEIVER
VR-806
KRF-V5080D
INSTRUCTION MANUAL
KENWOOD CORPORATION
B60-5439-00 00 MA (K, P, X, Y) 0311
This instruction manual is for some models. Model availability and features
(functions) may differ depending on the country and sales area.
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this model has several operation
modes. These modes enable the remote control to control other audio/video components. In order to
effectively use the remote control it is important to read the operating instructions and obtain a proper
understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation
modes may result in incorrect operations.
*5439/01-07/EN 04.1.22, 1:12 PM1

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Kenwood krf v5080d and is the answer not in the manual?

Kenwood krf v5080d Specifications

U.S.A and Canada

Audio Performance IconAudio Performance
Rated power output during STEREO operation100 watts per channel at 8Ω
Effective power output during SURROUND operation FRONT100 W + 100 W at 8Ω
Effective power output during SURROUND operation CENTER100 W at 8Ω
Effective power output during SURROUND operation SURROUND100 W + 100 W at 8Ω
Effective power output during SURROUND operation SURROUND BACK100 W at 8Ω
Total harmonic distortion0.05% (1 kHz, 50 W, 8Ω)
Frequency response20 Hz ~ 70 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)95 dB
Input sensitivity / impedance CD/DVD550 mV / 47 kΩ
Output level / impedance TAPE REC550 mV / 1 kΩ
Output level / impedance PRE OUT (SUBWOOFER)1.5 V / 2.2 kΩ
Output level / impedance PRE OUT (SURROUND BACK)1.5 V / 2.2 kΩ
Tone control BASS±10 dB (at 100 Hz)
Tone control TREBLE±10 dB (at 10 kHz)
Loudness control VOLUME at -30dB level+8 dB (at 100 Hz)

Other countries

Audio Performance IconAudio Performance
Rated power output during STEREO operation100 watts per channel at 8Ω
Effective power output during SURROUND operation FRONT (1 kHz, 0.7% T.H.D.)100 W + 100 W at 8Ω
Effective power output during SURROUND operation FRONT (1 kHz, 10% T.H.D.)120 W + 120 W at 8Ω
Effective power output during SURROUND operation CENTER (1 kHz, 0.7% T.H.D.)100 W at 8Ω
Effective power output during SURROUND operation CENTER (1 kHz, 10% T.H.D.)120 W at 8Ω
Effective power output during SURROUND operation SURROUND (1 kHz, 0.7% T.H.D.)100 W + 100 W at 8Ω
Effective power output during SURROUND operation SURROUND (1 kHz, 10% T.H.D.)120 W + 120 W at 8Ω
Total harmonic distortion0.05% (1 kHz, 50 W, 8Ω)
Frequency response20 Hz ~ 70 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)95 dB
Input sensitivity / impedance CD/DVD550 mV / 47 kΩ
Input sensitivity / impedance DVD/6CH INPUT550 mV / 15 kΩ
Output level / impedance TAPE REC550 mV / 1 kΩ
Output level / impedance PRE OUT (SUBWOOFER)1.5 V / 2.2 kΩ
Tone control BASS±10 dB (at 100 Hz)
Tone control TREBLE±10 dB (at 10 kHz)
Loudness control VOLUME at -30dB level+8 dB (at 100 Hz)

DIGITAL AUDIO

Audio Input Specifications IconAudio Input Specifications
Sampling frequency32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length Optical(–15 dBm ~ –21 dBm), 660 nm ±30 nm
Input level / impedance Coaxial0.5 Vp-p / 75 Ω

VIDEO

Video Input/Output Specifications IconVideo Input/Output Specifications
VIDEO inputs / outputs VIDEO (composite)1 Vp-p / 75 Ω
COMPONENT VIDEO inputs/outputs COMPONENT VIDEO (luminance signal)1 Vp-p/75 Ω
COMPONENT VIDEO inputs/outputs COMPONENT VIDEO (CB/CR-signal)±0.32 Vp-p/75 Ω

FM tuner

FM Tuner Specifications IconFM Tuner Specifications
Tuning frequency range87.5 MHz ~ 108.0 MHz
Usable sensitivity (MONO) VR-8061.3 µV (75 Ω)/ 13.2 dBf
Usable sensitivity (MONO) KRF-V5080D1.6 µV (75 Ω)/ 15.2 dBf
50dB quieting sensitivity STEREO28 µV (75 Ω)/ 40.2 dBf
Total harmonic distortion (MONO)0.5% (71.2 dBf input)
Total harmonic distortion (STEREO)0.7% (71.2 dBf input)
Signal to noise ratio (MONO)75 dB (71.2 dBf input)
Signal to noise ratio (STEREO)68 dB (71.2 dBf input)
Stereo separation40 dB
Selectivity VR-80670 dB
Selectivity KRF-V5080D50 dB
Frequency response30 Hz ~ 15kHz, +0.5 dB, –3.0 dB

AM tuner

AM Tuner Specifications IconAM Tuner Specifications
Tuning frequency range 10 kHz step (VR-806)530 kHz ~ 1, 700 kHz
Tuning frequency range 10 kHz step (KRF-V5080D)530 kHz ~ 1, 610 kHz
Tuning frequency range 9 kHz step (KRF-V5080D)531 kHz ~ 1, 602 kHz
Usable sensitivity (VR-806)16 µV / (600 µV/m)
Usable sensitivity (KRF-V5080D)16 µV / (600 µV/m)
Signal to noise ratio50 dB

GENERAL

General Specifications IconGeneral Specifications
Power consumption VR-8062.2 A
Power consumption KRF-V5080D280W
AC outlet SWITCHED VR-806total 150 W, 1.25 A max.
AC outlet SWITCHED KRF-V5080Dtotal 90 W max.
Dimensions Width440 mm (17-5/16")
Dimensions Height143 mm (5-5/8")
Dimensions Depth303 mm (11-15/16")
Weight (Net) VR-8067.7 kg (17.0 lb)
Weight (Net) KRF-V5080D (for the Australia)7.8 kg (17.2 lb)
Weight (Net) KRF-V5080D (except for the Australia)8.8 kg (19.4 lb)
View in Manual

Summary

Before Applying Power

Safety Precautions

Essential safety guidelines and warnings to prevent hazards like electric shock and fire.

Preparing the Remote Control

Loading Batteries

Step-by-step guide on how to load batteries into the remote control unit.

Special Features

Surround Sound Technologies

Details on Dolby Digital, Pro Logic IIx, DTS, and Neo:6 for enhanced audio ambience.

Setting Up the System

Input Mode Configuration

Setting Up the System (Continued)

Connecting Audio Components

Diagrams and steps for connecting various audio sources like CD/DVD players and tape decks.

Connecting Video Components

Instructions for connecting video sources like VCRs and DVD players for display.

Connecting Component Video Sources

Digital Audio Connections

Steps for connecting digital audio sources such as DTS, Dolby Digital, and PCM signals.

Connecting 6-Channel DVD Player

Connecting Speakers

Detailed guidance on connecting all speakers, including front, center, surround, and back speakers.

Connecting Terminals and Antennas

Preparing for Surround Sound

Speaker System Configuration

Step-by-step guide to set up speaker system parameters like type, size, and mode.

Preparing for Surround Sound (Continued)

Adjusting Speaker Levels and Distances

Guide to setting speaker volume levels, test tones, and inputting distances for accurate sound staging.

Recording

Recording Analog and Digital Sources

Instructions for recording audio and video from analog and digital inputs.

In Case of Difficulty

Troubleshooting Amplifier and Tuner Issues

Solutions for common problems related to sound, speaker connections, and tuner reception.

In Case of Difficulty (Continued)

Remote Control Operational Issues

Related product manuals