Do you have a question about the Kenwood KRF-V8090D and is the answer not in the manual?
stereo operation power output | 100 W + 100 W |
---|---|
surround operation power output (front) | 100 W + 100 W |
surround operation power output (center) | 100 W |
surround operation power output (surround) | 100 W + 100 W |
surround operation power output (surround back) | 100 W + 100 W |
total harmonic distortion | 0.009 % (1 kHz, 50 W, 8 Ω) |
---|---|
frequency response CD/DVD | 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dB |
signal to noise ratio PHONO (MM) | 75 dB |
signal to noise ratio CD/DVD | 95 dB |
bass control | ±10 dB (at 100 Hz) |
treble control | ±10 dB (at 10 kHz) |
tuning frequency range | 87.5 MHz ~ 108.0 MHz |
---|---|
usable sensitivity (MONO) | 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB) |
selectivity | 70 dB |
stereo separation | 40 dB |
power consumption | 3.4 A |
---|---|
dimensions | W : 440 mm, H : 166 mm, D : 396 mm |
weight | 12.1 kg |
stereo operation power output | 130 W + 130 W |
---|---|
surround operation power output (front) | 130 W + 130 W |
surround operation power output (center) | 130 W |
surround operation power output (surround) | 130 W + 130 W |
surround operation power output (surround back) | 130 W + 130 W |
total harmonic distortion | 0.009 % (1 kHz, 50 W, 8 Ω) |
---|---|
frequency response CD/DVD | 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dB |
signal to noise ratio PHONO (MM) | 75 dB |
signal to noise ratio CD/DVD | 95 dB |
bass control | ±10 dB (at 100 Hz) |
treble control | ±10 dB (at 10 kHz) |
tuning frequency range | 87.5 MHz ~ 108.0 MHz |
---|---|
usable sensitivity (MONO) | 1.6 µV (75 Ω)/ 15.2 dBf (75 kHz dev, SINAD 30 dB) |
selectivity | 50 dB |
stereo separation | 40 dB |
power consumption | 300 W |
---|---|
dimensions | W : 440 mm, H : 166 mm, D : 396 mm |
weight | 12.1 kg |
Essential safety guidelines to prevent hazards during operation.
Guide to physically connecting all audio, video, and speaker interfaces.
Connecting speakers and configuring for optimal surround sound playback.
Customizing audio output using tone, loudness, and EQ settings.
Details on Dolby Digital, EX, Pro Logic IIx, and DTS audio technologies.
Fine-tuning sound parameters like dimension, panorama, and center width.
Programming the remote for external devices and finding codes.
Checking, re-assigning keys, and operating other components.
Reference tables for remote control setup codes for various DVD player models.
Procedure to reset the unit's internal computer in case of malfunction.