Do you have a question about the Kenwood KT-3300D and is the answer not in the manual?
tuning frequency range | 87.5 MHz to 108 MHz |
---|---|
antenna impedance | 75 ohms unbalanced |
usable sensitivity (IHF) | 10.8 dBf 31.2 dBf |
total harmonic distortion (mono, 1 kHz, 40 kHz dev) | 0.01% 0.03% |
---|---|
signal-to-noise ratio (mono, 40 kHz dev., 1 mV input) | 82 dB |
signal-to-noise ratio (stereo, 46 kHz dev., 1 mV input) | 67 dB |
image rejection ratio | 80 dB |
---|---|
IF rejection ratio | 110 dB |
spurious rejection ratio | 100 dB |
power consumption | 25 W |
---|---|
width | 440 mm (17-5/16") |
height | 88.5 mm (3-7/16") |
weight | 5.3 kg (11.7 lb) |
---|---|
depth | 327 mm (13-1/4") |
Record serial number and model for service information and dealer contact.
Carefully unpack, check for shipping damage, and retain carton for future use.
Important warnings about preventing electric shock, fire, and exposure to rain or moisture.
Instructions on how to select the correct AC voltage (120V or 220-240V) for your region.
Advice on unit placement, avoiding sunlight, heat, moisture, and vibration.
How to clean the unit and immediate actions for abnormal smell or smoke.
Warnings against removing the case, touching internal parts, or operating with wet hands.
Connecting output jacks to an amplifier and information on the power cord.
Instructions for connecting indoor and outdoor FM antennas to the tuner.
Detailed steps for connecting 75Ω coaxial and 300Ω ribbon antennas using the adapter.
Explanation of the rear panel switch for FM de-emphasis settings.
Description of Power, Program, Output Level, Preset Station, Memory, REC CAL, and Modulation switches.
Explanation of IF BAND, RF SELECTOR, TUNING MODE, TUNING LOCK, and ANTENNA switches.
Details on the TUNING knob, indicators for tuning mode, lock, and signal strength.
Explanation of indicators for Stereo, REC CAL, MUTING, Modulation, and Preset functions.
How to perform Auto Tuning and Manual Tuning for FM reception.
Steps for storing stations in presets and setting up unattended program recording.
Explanation of multipath reflections and their effect on FM sound quality.
Using an oscilloscope or amplifier to adjust the antenna for minimal multipath distortion.
Table of common problems, possible causes, and remedies for tuner operation.
Detailed technical specifications for the FM tuner section (EIA and IEC/NF).
General information including power consumption, dimensions, and net weight.