Kenwood KVT-534DVDM User Manual

English 39
TV Watching
Function During TV Screen
Basic functions are available even when the TV
screen is displayed.
1 Display the TV screen
[TV] button on the "Source Select" screen
IN
AUTO1
AF
Mode:Full AV–OUT:AV–IN
TV
TV TV1
2chGroup 1 Preset 1
1
4
7
8
6 5
3
2
1 TV Band Number Display
2 TV Area Group Display
See <TV Setup> (page 74).
3 Memory Number Display
4 Channel Number Display
5 Channel Up Area
Increases the channel.
6 Channel Down Area
Decreases the channel.
7 Band Switch Area
Switches to TV1 or TV2.
8 Information Display Button Area
⁄
• The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
Various control screens appear in the TV source mode. You can only operate TV with the optional accessory
TV Tuner connected.
Functions When Displaying the Easy
Control Panel
Displays the basic operation buttons on the
screen.
1 While the source is playing, press the [FNC]
button
Mode:Full AV–OUT:AV–IN
TV TV1
TV
SCRN
TI
2ch
Preset 1
BAND SEEK
1
1
2
3
1 Selects a channel.
Use the <Seek Mode> (page 41) to change
the channel tuning sequence.
2 Switches to TV1 or TV2.
3 Switches to the Seek mode.
See <Seek Mode> (page 41).
⁄
• When the navigation screen is displayed, press the [NAV]
button to switch to the source playback screen.
• The Easy Control Panel is hidden when you touch a
central part of the monitor.
B64-4292-0000English.indd39B64-4292-0000English.indd39 08.10.313:01:37PM08.10.313:01:37PM

Kenwood KVT-534DVDM Specifications

General

Brand	Kenwood
Model	KVT-534DVDM
Category	Car Video System
Language	English