To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KX-7030 and is the answer not in the manual?
Power| power consumption | 24 W |
|---|
Audio Specifications| wow and flutter | 0.045% (W.R.M.S.) |
|---|---|
| signal-to-noise ratio with Dolby C NR | 75 dB |
| signal-to-noise ratio with Dolby B NR | 67 dB |
| signal-to-noise ratio without Dolby NR | 59 dB |
| frequency response with normal tape | 20 Hz to 18, 000 Hz |
| frequency response with CrO2 tape | 20 Hz to 19, 000 Hz |
| frequency response with metal tape | 20 Hz to 20, 000 Hz |
| harmonic distortion | Less than 0.7% |
Input and Output| input sensitivity/impedance for line in | 77.5 mV/50 kΩ |
|---|---|
| output level/impedance for line out | 490 mV/3 kΩ |
| headphones output power | 0.85 mW/8 Ω |
Weight and Dimensions| width | 440 mm |
|---|---|
| height | 127 mm |
| depth | 324 mm |
| weight | 5.1 kg |
Lists components and their specific functions and operations.
Details auto-bias functions and the test mode procedure.
Covers TC9164N IC block diagram, pin connections, data input, and timing.
Lists the specifications and part numbers for the cassette mechanism components.
Explains mechanism operations for playback, record, fast forward, rewind, cue, and review.
Describes rotary switch function and cam flow for mechanism control.
Covers demagnetization, cleaning, azimuth, and tape speed adjustments.
Details adjustments for playback level, bias current, and fluorescent meter.
Illustrates the setup for measurement equipment during adjustments.
Lists newly introduced parts for this model.
Shows destination codes for different units and regions.
Provides general specifications like power consumption, dimensions, and weight.
