liquidiser/mill
1 Empty the jug/jar before unscrewing it from the blade unit.
2Wash the jug/jar by hand.
3 Remove and wash the seals.
4 Don’t touch the sharp blades – brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don’t
immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
●
Detach the beaters from the drive head by gently pulling them
free. Wash in warm soapy water.
●
Wipe the drive head with a damp cloth, then dry.
Do not immerse the drive head in water.
all other parts
●
Wash by hand, then dry.
●
Alternatively they can be washed on the top rack of your
dishwasher. A short low temperature programme is
recommended.
service & customer care
●
If the cord is damaged it must, for safety reasons, be replaced
by Kenwood or an authorised Kenwood repairer.
UK
If you need help with:
●
Using your machine
●
Servicing or repairs (in or out of guarantee)
call Kenwood on 023 92392333 and ask for customer care.
Have your model number ready - it’s on the underside of
the processor.
●
spares and attachments
call 0870 2413653.
other countries
Contact the shop where you brought the food processor.
guarantee UK only
If your food processor goes wrong within one year from the date
you bought it, we will repair or replace it free of charge provided:
●
you have not misused, neglected, or damaged it;
●
it has not been modified (unless by Kenwood);
●
it is not second hand;
●
it has not been used commercially;
●
you have not fitted a plug incorrectly; and
●
you supply your receipt to show when you bought it.
This guarantee does not affect your statutory rights.
7
To Next Page
Loading...
Need help?
General
