8
Problem Cause Solution
The processor will not operate No power/indicator light not lit. Check processor is plugged in
Bowl not locked on correctly. Check bowl is located correctly and the handle is
situated towards the right hand side.
Lid not locked correctly. Check that the lid interlock is located correctly into
the handle area.
The processor will not work if the bowl and
lid are fitted incorrectly.
If none of the above check the fuse/circuit breaker in
your home.
Liquidiser or mini chopper/mill Wrong base used. The mini chopper/mill base is not
will not operate interchangeable with the liquidiser jug. The
processor will not operate if the wrong base
is fitted. Check graphic is correct on base used.
Processor stops during Processor overloaded/maximum capacities Check maximum capacities stated under “to use your
processing exceeded. food processor”.
Lid unlocked. Check lid is locked correctly.
Poor performance of Refer to hints in relevant “using the attachment” section. Check attachments are assembled correctly.
tools/attachments.
troubleshooting guide
To Next Page
Loading...
