Need help?Do you have a question about the Kenwood NX-1300N and is the answer not in the manual?
General| Power Output | 5W (VHF), 4W (UHF) |
|---|---|
| Water Resistance/IP Rating/Ingress Protection | IP54 |
| Operating Voltage | 7.5V DC ±20% |
| Frequency Range | 136-174 MHz |
| Channel Spacing | 12.5 kHz / 25 kHz |
| Digital Protocol | NXDN |
| Modulation | 16K0F3E, 11K0F3E |
Identifies and describes the transceiver's buttons and controls.
Explanation of icons and indicators shown on the transceiver display.
Procedure for powering the transceiver on and off.
How to control the audio volume of the transceiver.
Steps to navigate and select operating zones and channels.
Instructions for sending transmissions on the transceiver.
Guide for initiating group calls using NXDN or DMR.
Procedure for initiating individual calls using NXDN or DMR.
How to receive calls and adjust volume.
Enters Emergency Mode for distress calls.
Monitors signals on transceiver channels and stops on a signal.
Enables hands-free transmission using voice activation.
Procedure for unlocking the transceiver with a password.
Procedure for entering password on non-LCD models.
Automatically changes to priority channels when a call is received.
Switches the transceiver to secure (encrypted) transmission.
Steps for connecting a headset and operating VOX.
To Next Page
