Need help?Do you have a question about the Kenwood NX-5000 Series and is the answer not in the manual?
General| Analog Protocol | FM |
|---|---|
| GPS | Optional |
| Bluetooth | Optional |
| Operating Temperature | -30°C to +60°C |
| Modulation | FM |
| Channel Spacing | 6.25 kHz, 12.5 kHz, 25 kHz |
| Digital Protocol | NXDN |
| Display | LCD |
| Ingress Protection | IP67 |
| MIL-STD | MIL-STD-810G |
| Frequency Range | 136-174 MHz, 400-520 MHz, 700-900 MHz (depending on model) |
Procedure for turning the transceiver on and off.
How to initiate a group call in P25 Conventional mode.
How to initiate an individual call in P25 Conventional mode.
How to initiate a group call in P25 Trunking mode.
How to initiate an individual call in P25 Trunking mode.
How to initiate group calls in NXDN/DMR Conventional modes.
How to initiate individual calls in NXDN/DMR Conventional modes.
How to initiate group calls in NXDN/DMR Trunking modes.
How to initiate individual calls in NXDN/DMR Trunking modes.
Navigating and using the transceiver's menu system for functions.
Making telephone and status calls in various trunking modes.
How to initiate and exit emergency calls on the transceiver.
Using scrambler and encryption for secure transmissions.
To Next Page
