How to fix a Kenwood NX-5200 that will not power on?
If your Kenwood Transceiver cannot be powered on, and the LCD doesn't function even when the power switch is on, it may be due to broken BGA parts. Bring the printed circuit board (XC1-0331-81/XC1-0360-11) in for service.
What to do if CN2 is less than 6V in Kenwood Transceiver?
If CN2 is less than 6V in your Kenwood Transceiver, charge the battery.
General| IP Rating | IP67 |
|---|---|
| Zones | 128 |
| GPS | Yes |
| Bluetooth | Yes |
| Voltage Range | 7.5V DC ±20% |
| Operating Temperature | -30°C to +60°C |
| Frequency Range | 136-174 MHz |
| Battery Life | 14 hours (Digital mode) |
| Digital Protocol | NXDN, DMR |
| Display | LCD |
Instructions for turning the transceiver power ON and OFF using the Power switch/Volume control.
Guide on how to adjust the transceiver volume by rotating the Power switch/Volume control.
Procedure for entering the transceiver password to unlock the device if protected.
Steps to select the desired zone and channel using programmed keys on the transceiver.
How to select a Talkgroup ID to make a call to parties on a Conventional channel.
Procedure to make calls to specific persons on a Conventional channel.
Selecting a Talkgroup ID to make a call to parties on a Trunking channel.
How to hear calls when a group ID matches the transceiver's set ID on Conventional or Trunking channels.
Procedure for receiving individual calls on Conventional or Trunking channels.
Hearing group calls on Conventional or Trunking channels when the Group ID matches.
Accessing and configuring transceiver functions via the Menu system.
Understanding how transceiver operations are tied to programmed keys.
Explains methods for entering characters using keys or keypad on the transceiver.
Details on using the Scan feature for monitoring transceiver channels.
Instructions on how to reprogram the scan list and priority channels.
Procedures for making telephone calls using Autodial or manual dialing.
How to handle incoming telephone calls on the transceiver.
Steps to select and transmit a status ID to a called unit.
Information on how password protection affects encryption keys.
How to reprogram QT or DQT codes on channels using OST.
Procedure for setting the built-in clock time on the transceiver.
Explanation of the Time-Out Timer feature to prevent extended channel use.
Description of the Battery Saver function for reducing power consumption.
How the transceiver alerts the user when the battery power is low.
Understanding the BCL feature that prevents transmission on an occupied channel.
Steps to enable or disable the Bluetooth function on the transceiver.
Guide on searching for and pairing Bluetooth devices with the transceiver.
Connecting, disconnecting, and deleting registered Bluetooth devices via My Devices.
How to switch audio output between transceiver speaker and Bluetooth headset.
Instructions for inserting and recognizing the microSD card in the transceiver.
Procedure to format the microSD card for use with the transceiver.
To Next Page
