Kenwood NX-5200 User Manual

USEFUL FUNCTIONS
There are some useful functions on your transceiver which allows you to display
information of the Bluetooth devices registered to the transceiver and to switch the
speaker audio output.
o
Connecting/ Disconnecting/ Deleting a registered device using My Devices
Press the key programmed as [Menu] to enter Bluetooth My Devices Mode using
the Menu Mode.
To connect a device:
1
Press the [ ] key or the [J] and [K] keys to select the device to connect to.
2
Press the [
] or [ ] key to connect.
3
Press the [ ] or [ ] key to confirm the connection.
●
The LED indicator blinks in blue while the transceiver is connecting to the device,
“Connecting” appears on the display.
“Connected” appears when the connection is established.
47

Kenwood NX-5200 Specifications

General

IP Rating	IP67
Zones	128
GPS	Yes
Bluetooth	Yes
Voltage Range	7.5V DC ±20%
Operating Temperature	-30°C to +60°C
Frequency Range	136-174 MHz
Battery Life	14 hours (Digital mode)
Digital Protocol	NXDN, DMR
Display	LCD