To Next PageTo Next Page
Need help?Do you have a question about the Kenwood RXD-A53 and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| Frequency Response | 20Hz to 20kHz |
| Total Harmonic Distortion (THD) | 0.7% |
| Signal-to-Noise Ratio | 75dB (line) |
| Dimensions | 270 x 335 x 343mm |
| Total harmonic distortion | 0.7% |
| CD Player | Yes |
| Remote Control | Yes |
| Type | Stereo Receiver |
| Functions | CD |
| Tuner | Yes |
| Speaker Impedance | 6 ohms |
Details model variations, speaker types, and destination compatibility.
Procedure for resetting the microcomputer to resolve malfunctions.
Diagrams showing the front and rear external views of the unit.
Instructions on how to open the tray if it does not come out.
Process for setting initial conditions and default system settings.
Table showing tuner specifications based on destination regions.
Instructions for entering and operating various diagnostic test modes.
Details the main microprocessor and its block diagram.
Calibrating amplifier idle current and CD player laser current.
Steps for adjusting cassette mechanism, tape speed, and bias.
Diagrams showing how to connect measurement equipment for adjustments.
Component layout for a section of the PC board.
Component layout for another section of the PC board.
Diagram showing the breakdown of the cassette mechanism.
Diagram showing the breakdown of the main unit's components.
Lists parts specific to these models.
Lists parts specific to these models.
Lists parts for the remaining models.
Details power output based on FTC and DIN standards.
Specs for track, recording system, heads, and winding time.
Specs for laser wavelength, power class, and wow/flutter.
