Need help?Do you have a question about the Kenwood TH-28A and is the answer not in the manual?
General| Frequency Range TX | 144-146 MHz |
|---|---|
| Modulation | FM |
| Channels | 200 |
| Impedance | 50 Ω |
| Output Power | 5 W |
| Receiver Sensitivity | 0.2 µV (12 dB SINAD) |
| Voltage | 7.2 VDC |
| Current drain TX / Current Consumption | 1.5 A |
Instructions for installing the optional CTCSS unit.
Guide to installing the optional memory expansion unit.
How to program the functions of the remote control microphone.
Guidance on connecting an external speaker for audio output.
Identifies and explains the transceiver's keys and switches.
Procedure for charging the NiCd battery pack.
Information on expected battery life under various conditions.
Initial steps to turn on and prepare the transceiver for use.
Methods for choosing operating frequencies using keyboard or controls.
Step-by-step guide for sending signals.
How to adjust the power level for transmission.
Procedure for storing frequencies and settings in memory channels.
Overview of available scanning modes like Memory and Band Scan.
How to use tone frequencies for repeater access.
Storing and recalling DTMF telephone numbers.
Explanation of the DTSS feature for selective squelch.
Programming individual and group codes for paging.
Storing and retrieving messages using the transceiver's memory.
How the tone alert function signals incoming transmissions.
Enables or disables front panel key functions to prevent accidental operation.
Activating and configuring the battery saving function.
Setting the transceiver's internal clock.
Procedures and guidelines for returning the transceiver for repair.
To Next Page
