Kenwood TH-K7 User Manual

I
5 q-q
o
ts 6o :8 €N
do GO
6=
OD
o
o
o
z
tLI
v
z
o
E
o o.
G
o C,
o o
o
=
z
I g
EN
f
z
z
I F
o
f
(r F
a z
N
\<
I
-
I
F
(f [!
o z
m
J
f
o
l!
N
r = o
$ s

Kenwood TH-K7 Specifications

General

Modulation	FM
Antenna impedance	50 ohms
Power Output	5W
Dimensions	58 x 120 x 38 mm
Current drain TX	1.5 A
Frequency Range	144-146 MHz (RX/TX)
Channel Capacity	200 channels
Supply	7.4V DC

Summary

Operating Basics

Power On/Off

Instructions on how to turn the transceiver power on and off.

Volume Control

How to adjust the volume using the volume control knob.

Changing Bands

Details on switching between the VHF and UHF bands.

Channel Select

How to select channels using the ENC. control in VFO mode.

Setting Squelch Level

How to set the squelch level to block unwanted noise.

Programmable VFO

Enables changing the VFO frequency range for VHF and UHF bands.

Operating Modes

VFO Mode

Allows tuning and scanning across the entire frequency range.

Menu

Tone/CTCSS

Turns the Tone or CTCSS function on or off.

CTCSS Frequency

Sets the specific frequency for the CTCSS squelch system.

Programmable VFO

Sets the VFO frequency tuning range for the transceiver.

Memory

Storing

Instructions for storing simplex and split channel frequencies and settings.

Recalling

How to retrieve stored memory channels.

Clearing

Procedures for clearing memory channels, VFO, or full transceiver settings.

CTCSS

Activating CTCSS

Steps to activate the CTCSS function on the transceiver.

Setting CTCSS Frequency

How to set the specific CTCSS frequency for communication.

Scan

VFO Scan

Scans all frequencies within the current band step size.

Program Scan

Memory Scan

Priority Scan

Miscellaneous Functions

Key Lock

Battery Save

Automatically turns off RX circuit when not in use to save battery.