Do you have a question about the Kenwood TH-79A and is the answer not in the manual?
Modulation | FM |
---|---|
Channels | 200 |
Memories | 200 |
Antenna Impedance | 50 Ω |
Battery | 7.2V |
Receiver Sensitivity | 0.16 µV for 12 dB SINAD |
Power Requirements | 7.2 VDC |
Frequency Range | 144-148 MHz / 430-450 MHz |
Information on charging and installing/removing NiCd battery packs.
Instructions for charging the NiCd battery pack, including notes and warnings.
Step-by-step guide for installing and removing the battery pack.
Guide for installing and removing non-rechargeable batteries.
Resets VFO data without affecting memory channels.
Resets all memory channels and settings to factory defaults.
Explains how to set transmit frequency higher or lower than receive frequency.
Sets transmit frequency offset direction (+ or -) relative to receive frequency.
How to use DTSS for selective calling and receiving via 3-digit codes.
Troubleshooting steps for display issues, low voltage, and cable problems.
Troubleshooting for no sound, squelch issues, and DTSS/Page/CTCSS settings.
How to connect a regulated power supply via DC cable.
How to connect to a cigarette lighter socket via cable.
Details transmitter output power and modulation characteristics.
Details receiver circuitry, sensitivity, and selectivity.
Allows the TH-79A to repeat signals from one band to another.