How to stop hearing other voices on my Kenwood TK-2400 channel?
Change the QT/DQT settings and make sure all group members change the settings on their transceivers to match the new QT/DQT setting.
What to do if I cannot hear other members of my group on my Kenwood Transceiver?
If you cannot hear other members of your group, ensure you are using the same frequency and QT/DQT settings. Also, check if other group members are using the Scrambler function and turn on your transceiver’s Scrambler. Finally, make sure you are within range of the other transceivers.
What to do if I hear other voices on the channel of my Kenwood Transceiver?
If you are hearing other voices besides your group members on the channel, change the QT/DQT settings. Make sure all group members change the settings on their transceivers to match the new QT/DQT setting.
Why can't I hear other group members on my Kenwood Transceiver?
Ensure you're using the same frequency and QT/DQT settings as the rest of your group. Also, check if other members are using the Scrambler function and turn on your transceiver’s Scrambler. Finally, confirm that you are within range of the other transceivers.
What to do if my Kenwood TK-2400 won't turn on?
The battery pack may be dead, so recharge or replace it. Alternatively, the battery pack may not be installed correctly. Remove the battery pack and install it again to ensure proper contact.
Why does my Kenwood Transceiver battery die quickly after charging?
The battery pack life is finished. Replace the battery pack with a new one.
How to turn on Kenwood Transceiver if it doesn't power on?
If your Kenwood Transceiver does not power on, the battery pack may be dead. Try to recharge or replace the battery pack. Also, the battery pack may not be installed correctly. Remove the battery pack and install again.
Why does the battery of my Kenwood Transceiver die quickly after charging?
If the battery power dies shortly after charging, the battery pack life is finished. Replace the battery pack with a new one.
General| Type | Portable FM Transceiver |
|---|---|
| Frequency Range | 136-174 MHz |
| Channels | 16 |
| Power Output | 5W |
| Channel Spacing | 12.5/25 kHz |
| Modulation | 16K0F3E / 11K0F3E |
| Operating Temperature | -20°C to +60°C |
| Battery | Li-Ion |
| Operating Voltage | 7.5V DC |
To Next Page
